FYI, I've got a macbook running mountain lion, but don't get any of this behavior.
On Fri, Mar 8, 2013 at 9:59 PM, stéfan piat <stefanp...@gmail.com> wrote: > hello, > > it's a bit out of topic, but I recently noticed strange behaviors of > [pix_video] on differents macbookpro running with osx moutain lion and > latest release of pd-extended. > For [pix_video] [dialog( make pd crash (not always) when trying to switch > between different video devices > (actually we were unable to change the video device, ant the default one > was not always the built-in camera) > I noticed on one of the computers that [enumerate( does work only when no > usb camera where plugged in > As for pix_record [codeclist( didn't output any codec list and we couldn't > set any codec either > > hope this help > stéfan > > > 2013/3/5 Alexandros Drymonitis <adr...@gmail.com> > >> Hmm, I do have the latest version but I guess I didn't check the help >> patch thoroughly...which is there to give insight. I'm sorry, should have >> checked better. The [device $1( did it eventually. Thanks a lot. >> >> >> On Tue, Mar 5, 2013 at 3:44 PM, Antoine Villeret < >> antoine.ville...@gmail.com> wrote: >> >>> ha, >>> >>> which version of Gem do you have ? >>> here is the latest help patch for pix_video, >>> >>> take a look at [enumerate( with which you will have the list of >>> available devices and driver >>> then [device $1( may help to choose the right one >>> and then [enumProps( to get its properties and [set(, [get( and other >>> [*Props( messages... >>> >>> you don't need dialog to setup camera, as a proof, there isn't any >>> dialog on Linux and we use camera everyday... >>> >>> cheers >>> >>> a >>> >>> >>> -- >>> do it yourself >>> http://antoine.villeret.free.fr >>> >>> >>> 2013/3/5 Alexandros Drymonitis <adr...@gmail.com> >>> >>>> Don't really get it. I'm sending [enumProps( to [pix_video], but if I >>>> do that before anything else I get the following error message: >>>> [pix_video]: cannot enumerate properties without a valid video-device >>>> If I set the desired camera via [dialog( I get nothing... >>>> What I wanna do is use a PS3 eye camera for a live performance, but I'd >>>> rather use Pd -nogui. The only way though I can choose this camera is to >>>> first create and render a [gemwin], destroy it and then send [dialog( to >>>> [pix_video], which won't be possible without the gui. >>>> So, to put my initial question in other words, how is it possible to >>>> set a camera other than the built in, without the gui? >>>> >>>> >>>> On Tue, Mar 5, 2013 at 11:19 AM, Antoine Villeret < >>>> antoine.ville...@gmail.com> wrote: >>>> >>>>> hi, >>>>> >>>>> All camera settings should be available through [pix_video] it self >>>>> without dialog. >>>>> Try sending [enumProps( and [pix_video] should send all readable and >>>>> writeable properties. >>>>> >>>>> Cheers >>>>> >>>>> a >>>>> >>>>> -- >>>>> do it yourself >>>>> http://antoine.villeret.free.fr >>>>> >>>>> >>>>> 2013/3/3 Alexandros Drymonitis <adr...@gmail.com> >>>>> >>>>>> With midi or audio you can send Pd a message on load which you get >>>>>> either with [get-midi-dialog] and [get-audio-dialog] or by connecting [r >>>>>> pd] to [print], then go to midi/audio settings and press ok. This gives >>>>>> you >>>>>> the message you have to send so you can use these settings immediately >>>>>> (say, if you use pd -nogui). >>>>>> What about using a camera other than the built-in? You can set that >>>>>> by sending [dialog( to [pix_video], but is it possible to set it by >>>>>> sending >>>>>> Pd a message? If so, where do you get this message from? >>>>>> >>>>>> _______________________________________________ >>>>>> Pd-list@iem.at mailing list >>>>>> UNSUBSCRIBE and account-management -> >>>>>> http://lists.puredata.info/listinfo/pd-list >>>>>> >>>>>> >>>>> >>>> >>> >> >> _______________________________________________ >> Pd-list@iem.at mailing list >> UNSUBSCRIBE and account-management -> >> http://lists.puredata.info/listinfo/pd-list >> >> >
_______________________________________________ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list