Solved the problem - has nothing to do with the PD object but only with the behaviour of the Arduino servo library:
"On boards other than the Mega, use of the library disables analogWrite() (PWM) functionality on pins 9 and 10, whether or not there is a Servo on those pins." http://arduino.cc/en/Reference/Servo Best, Maciej Am 30.04.2013 um 21:09 schrieb Maciej Sledziecki: > Hello, > > I´m running StandardFirmata 2.3. on Arduino Uno with PD extended 0.43.4 on > MacBookPro / MacOSX 10.6.8. > > What I´m trying to do, is to drive two pins (9 & 10) in "pwm" mode and at > least two others (5 & 6) in "servo" mode. > The pwm works fine - but only until I set one of the other pins to servo - > then the diode that should be dimmed by pwm is either ON when receiving > "analog 1" or OFF when receiving any other value. > > The only way to get back to pwm again, is to close the arduino comport an > reopen it again. > > Is there a way to avoid this and to drive different pins in different modes > at the same time? > > Thanks and best, > > Maciej > > > > > > > _______________________________________________ > Pd-list@iem.at mailing list > UNSUBSCRIBE and account-management -> > http://lists.puredata.info/listinfo/pd-list
_______________________________________________ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
