The baud rate issue seems strange, as the communicating devices should talk and listen to the same baud rate...no idea, sorry.
---------- Forwarded message ---------- From: Allen, Michael <[email protected]> Date: Mon, Nov 11, 2013 at 7:35 PM Subject: Re: [PD] Arduino/Raspberry comport issue To: Alexandros Drymonitis <[email protected]> The baud rate in the arduino code is 9600. But like I said, in pd it doesn't seem to matter? If the first rate I try in the comport object is 9600 it won't connect. If I change to 115200 it will. Similarly if I close the patch with 115200 saved and reopen it, the comport won't connect unless I change the baud rate back to 9600. I haven't tried other speeds but I bet they would do the same thing. It seems like it wants to do the opposite of what I want it to do. A mind of its own. I have a message going to the comport object to open it. Either [open 0 9600( with whatever port [devices] tells me, or [devicename /dev/ttyAMA0 9600( On Nov 11, 2013, at 9:14 AM, "Alexandros Drymonitis" <[email protected]> wrote: Are you sure the baud rate you set to [comport] is the same as the code you load on your Arduino? That could be a problem.. If you send the [devices( message to [comport] what do you get in the console? On Mon, Nov 11, 2013 at 11:19 AM, kubriel <[email protected]> wrote: > > It won?t receive data. >> > Hi! i was using RPi plenty of times headless without any problems with > comport in pd, but usually running armarch linux. > but i was not using device name, but device nr, like [comport 0 9600] for > uno, or [comport 4 9600] for duemilanove. > > kub > > -- > http://kubriel.servus.at > > > _______________________________________________ > [email protected] mailing list > UNSUBSCRIBE and account-management -> http://lists.puredata.info/ > listinfo/pd-list >
_______________________________________________ [email protected] mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
