Le 29/03/2014 15:43, Simon Wise a écrit : > On 29/03/14 22:56, Jack wrote: >> Hello, >> >> Is it possible to use BeagleBoard, Raspberry Pi, Udoo or others without >> dropout with this configuration : >> >> 8 IR sensors >> 1 BeagleBoard (or Raspberry Pi, or Udoo or others) with Pd and linux >> 1 sound cards with 8 output >> 8 speakers >> >> like this : 8 IR sensors -> Beagleboard -> sound card -> 8 >> speakers (so >> it is possible to play 8 sounds at 44100 Hz 16 bits *simultaneously*). >> >> If yes, can you tell me which model of sound card works well with these >> cards ? >> Thanx. >> ++ > > The esi gigaport hd+ is said to give 8 outs cleanly on an Rpi, search > the list for reports from several people, but I have not tried it myself. > > With an Rpi you might then use the GPIO for your IR, but if the IR > stuff is USB then you'd have to test, and may well be out of luck. A > cheaper sound card and a more expensive computer may be just as > sensible though. > > > Simon > > _______________________________________________ > [email protected] mailing list > UNSUBSCRIBE and account-management -> > http://lists.puredata.info/listinfo/pd-list Thanx for this info Simon. I dug a little bit about this sound card and found that : https://www.mail-archive.com/[email protected]/msg57554.html http://puredata.info/docs/raspberry-pi/FrontPage in french : http://saillant.pierrick.free.fr/?p=30
Other sound cards with 8 outputs ? ++ Jack _______________________________________________ [email protected] mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
