Thanks, Thomas - looks like what I need but I can’t get zexy to compile. I get errors when running the scripts.
--Joel Corelitz / waveplant http://www.waveplantstudios.com (http://www.waveplantstudios.com/) [email protected] (mailto:[email protected]) 312-348-5798 (tel:312-348-5798) (voice & fax) On Thursday, May 14, 2015 at 7:43 AM, Thomas Mayer wrote: > Am 14. Mai 2015 05:45:11 MESZ, schrieb Joel Corelitz > <[email protected] (mailto:[email protected])>: > > Hi All! I’m new Here. > > > > I came across a thread from a few months ago that discussed this issue, > > so hopefully this isn’t too much of a re-tread. Sounded like this was > > a known “feature” with some workarounds but no clear-cut solution. > > > > I’m trying to route OSC messages, formatted as lists using Pd Vanilla: > > > > [netreceive -u -b 8024] > > | > > [oscparse] > > | > > [list trim] > > > > I see my list in the Pd window when the result is sent to [print], but > > when I [route] by the first number, nothing passes through. > > I’m able to route everything I need to in Max this way so some of this > > is admittedly due to not understanding the different ways Pd handles > > the data. > > > > Any help / workarounds are much appreciated. > Hi, > I have made an abstraction for that, that uses l2s and l2s from zexy: > https://github.com/residuum/Puredata-abstractions/blob/master/glue/s2f.pd > > Hth, > Thomas > > -- > Sent from a mobile device. > >
_______________________________________________ [email protected] mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
