About setting the cycle object to change the table name, I see in Max 5 documentation that you can also specify in this message the sample offset. >From what I tried in Pd, this is not working at all, it'll not read from the table at all.
check the bit in the documentation about it: *"The word **set, followed by the name of a buffer~ <https://docs.cycling74.com/max5/refpages/msp-ref/buffer~.html> object, changes the wavetable used by cycle~. The name can optionally be followed by an int specifying the sample offset into the named buffer~ <https://docs.cycling74.com/max5/refpages/msp-ref/buffer~.html> object's sample memory."* 2015-06-08 18:21 GMT-03:00 Alexandre Torres Porres <[email protected]>: > by the way, this table was a 256 point table containing the first half > cycle of a cosine. > > 2015-06-08 18:20 GMT-03:00 Alexandre Torres Porres <[email protected]>: > >> >> >>> If you have Max, you might try to see what happens in these two >>> situations: >>> - read from a buffer smaller than 512 bytes, >>> - read from a 512 byte buffer but with an offset. >>> >> >> it's not "bytes", it's just points, really. So, I tested the second >> thing. About the first, I guess the idea is that it'll fill the rest with >> zeros. But my test showed that it'll try to do that but it'll generate some >> "noise", check the attached picture. >> > >
_______________________________________________ [email protected] mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
