-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Yes, now you need libtool. Try something like : $ sudo apt-get update $ sudo apt-get build-dep puredata and try to re-compile. Or you can follow instructions given by Antoine. ++
Jack Le 05/07/2015 23:48, Rick Snow a écrit : > Thanks Jack. This seems to be moving in the right direction. > > I ran sudo apt-get install autoconf and that seemed to install > correctly. > > Now when I run ./autogen I get: autoreconf: Entering directory '. > ' autoreconf: configure.ac not using Gettext a series of 10 more > autoconf: returns including: autoreconf: configure.in: subdirectory > bindings/cpp not present autoreconf: configure.in: not using > Libtool then configure.in: 104: error: possibly undefined macro: > AC_LIBTOOL_WIN32_DLL If this token and others are legitemate, > please use m4_pattern_allow. See the Autoconf documentation. > configure.in:105 error: possibly undefined macro: AC_PROG_LIBTOOL > autoreconf: /usr/bin/autoconf failed with exit status: 1 > > thanks again, Rick > > >> Hello Rick, >> >> you can try before (if under debian based linux) : $ sudo apt-get >> install autoconf ++ >> >> Jack >> >> >> >> Le 05/07/2015 22:54, Rick Snow a écrit : >>> Hi list, >>> >>> I've been trying to set up a Raspberry Pi 2 for a few days and >>> am running into some problems. >>> >>> I was able to install Pd 43.3 without difficulty. >>> >>> But when I tried to install Pd 46.6 for the Raspberry Pi from >>> Miller's site: http://msp.ucsd.edu/software.html >>> >>> using the following directions: >>> >>> "run the following commands: ./autogen.sh ./configure make" >>> >>> >>> When I run: ./autogen.sh >>> >>> terminal returns: ./autogen.sh: 22 ./autogen.sh: autoreconf: >>> not found >>> >>> I have successfully run: sudo apt-get update and sudo apt-get >>> install build-essential >>> >>> Any advice would be greatly appreciated! >>> >>> best, Rick >>> >>> >>> _______________________________________________ >>> Pd-list@lists.iem.at mailing list UNSUBSCRIBE and >>> account-management -> >>> http://lists.puredata.info/listinfo/pd-list >>> >> >> -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 >> >> iQEcBAEBAgAGBQJVmZrpAAoJEOuluecjw8GU8uwIAJC/0kp3FyVJ8R3eIAo9b7GE >> 5hsJhNH0N2IJ1Alu1IIFZJZUTK8BbZbafodxXXRqXRlOZEQJlKDEcHeqH1Gk5zOo >> /3p316q4cArrY0TTl9c9jmUoWqnC9OPqx3YurQ5BuEZKc1e88Gbik5x9GGYa7bQ5 >> pRv/eWQ4kfwrUJ3Jwb9i1pWacgOmdlXL3SlyvZhPMTLbBBgujse3znwHEB+Pby7n >> Lny+htQ6EdP7pBPZMNnIdeopJUqadEwWT6Y6V5743zRBEp8zHr8/5JNfzkjdcb4b >> HSSKUWfoCOFQFh2VdrFQKjUsNMeD51KDx7d/8JxolGSZGVd3mW0Ts0viP9iUdbs= >> =9rdp -----END PGP SIGNATURE----- >> >> >> >> ------------------------------ >> >> Message: 3 Date: Sun, 5 Jul 2015 16:00:30 -0500 From: Rick Snow >> <ricks...@gmail.com> To: pd-list@lists.iem.at Subject: [PD] 2nd >> Pi 2 issue Message-ID: >> <cacejac+wc7tzn8647besymb1qbkwb_cx0pkegw_f4psawtb...@mail.gmail.com> >> >> Content-Type: text/plain; charset="utf-8" >> >> Dear list, >> >> In addition to having trouble getting pd 46.6 to install on the >> Raspberry Pi 2 I am having trouble compiling the NYU wiringPi >> objects. >> >> Does anyone know which architecture the Pi 2 requires? l_arm or >> .pd_linux? >> >> I am able to compile the objects using the provided makefile as >> an l_arm object but when I try to create a .pd_linux object with >> the makefile terminal returns: "* No rule to make target >> 'wiringPi_gpio.pd_linux'. Stop." >> >> same goes for the wiringPi_mcp3008.pd_linux object. >> >> Any advice greatly appreciated! Rick -------------- next part >> -------------- An HTML attachment was scrubbed... URL: >> <http://lists.puredata.info/pipermail/pd-list/attachments/20150705/3c 7957f3/attachment-0001.html> >> >> >> - ------------------------------ >> >> Message: 4 Date: Sun, 5 Jul 2015 23:12:18 +0200 From: Antoine >> Villeret <antoine.ville...@gmail.com> To: Jack <j...@rybn.org> >> Cc: "pd-list@lists.iem.at" <pd-list@lists.iem.at> Subject: Re: >> [PD] pd 46.6 on raspberry pi 2? Message-ID: >> <CAGn5wNcW7Nom7sfSO-ykmu5SsV2YjmPF98tu7=kb7w3kkpm...@mail.gmail.com> >> >> Content-Type: text/plain; charset="utf-8" >> >> hi >> >> Miller's zip already contains binary for RPI so you don't need to >> build it yourself. just install it with something like : >> >> cd pd/src sudo make -f makefile.gnu >> >> cheers a >> >> -- do it yourself http://antoine.villeret.free.fr >> >> 2015-07-05 23:00 GMT+02:00 Jack <j...@rybn.org>: >> >>> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 >>> >>> Hello Rick, >>> >>> you can try before (if under debian based linux) : $ sudo >>> apt-get install autoconf ++ >>> >>> Jack >>> >>> >>> >>> Le 05/07/2015 22:54, Rick Snow a écrit : >>>> Hi list, >>>> >>>> I've been trying to set up a Raspberry Pi 2 for a few days >>>> and am running into some problems. >>>> >>>> I was able to install Pd 43.3 without difficulty. >>>> >>>> But when I tried to install Pd 46.6 for the Raspberry Pi >>>> from Miller's site: http://msp.ucsd.edu/software.html >>>> >>>> using the following directions: >>>> >>>> "run the following commands: ./autogen.sh ./configure make" >>>> >>>> >>>> When I run: ./autogen.sh >>>> >>>> terminal returns: ./autogen.sh: 22 ./autogen.sh: autoreconf: >>>> not found >>>> >>>> I have successfully run: sudo apt-get update and sudo >>>> apt-get install build-essential >>>> >>>> Any advice would be greatly appreciated! >>>> >>>> best, Rick >>>> >>>> >>>> _______________________________________________ >>>> Pd-list@lists.iem.at mailing list UNSUBSCRIBE and >>>> account-management -> >>>> http://lists.puredata.info/listinfo/pd-list >>>> >>> >>> -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 >>> >>> iQEcBAEBAgAGBQJVmZrpAAoJEOuluecjw8GU8uwIAJC/0kp3FyVJ8R3eIAo9b7GE >>> >>> 5hsJhNH0N2IJ1Alu1IIFZJZUTK8BbZbafodxXXRqXRlOZEQJlKDEcHeqH1Gk5zOo >>> /3p316q4cArrY0TTl9c9jmUoWqnC9OPqx3YurQ5BuEZKc1e88Gbik5x9GGYa7bQ5 >>> >>> pRv/eWQ4kfwrUJ3Jwb9i1pWacgOmdlXL3SlyvZhPMTLbBBgujse3znwHEB+Pby7n >>> Lny+htQ6EdP7pBPZMNnIdeopJUqadEwWT6Y6V5743zRBEp8zHr8/5JNfzkjdcb4b >>> >>> HSSKUWfoCOFQFh2VdrFQKjUsNMeD51KDx7d/8JxolGSZGVd3mW0Ts0viP9iUdbs= >>> =9rdp -----END PGP SIGNATURE----- >>> >>> _______________________________________________ >>> Pd-list@lists.iem.at mailing list UNSUBSCRIBE and >>> account-management -> >>> http://lists.puredata.info/listinfo/pd-list >>> >> -------------- next part -------------- An HTML attachment was >> scrubbed... URL: >> <http://lists.puredata.info/pipermail/pd-list/attachments/20150705/44 19b213/attachment-0001.html> >> >> >> - ------------------------------ >> >> Message: 5 Date: Sun, 5 Jul 2015 23:18:09 +0200 From: Antoine >> Villeret <antoine.ville...@gmail.com> To: Rick Snow >> <ricks...@gmail.com> Cc: "pd-list@lists.iem.at" >> <pd-list@lists.iem.at> Subject: Re: [PD] 2nd Pi 2 issue >> Message-ID: >> <cagn5wndnb0lj3g0r0s208isym0cmr0wf71vi2kcvj6fmkl9...@mail.gmail.com> >> >> Content-Type: text/plain; charset="utf-8" >> >> 2015-07-05 23:00 GMT+02:00 Rick Snow <ricks...@gmail.com>: >> >>> Dear list, >>> >>> In addition to having trouble getting pd 46.6 to install on the >>> Raspberry Pi 2 I am having trouble compiling the NYU wiringPi >>> objects. >>> >>> Does anyone know which architecture the Pi 2 requires? l_arm >>> or .pd_linux?t >>> >> both are good candidates but pd_linux could be of arch i686, >> x86_64 or arm (or even something else) >> >>> >>> I am able to compile the objects using the provided makefile as >>> an l_arm object but when I try to create a .pd_linux object >>> with the makefile terminal returns: "* No rule to make target >>> 'wiringPi_gpio.pd_linux'. Stop." >>> >> >> run pd with -verbose option and look at pd's console to know what >> it is trying to load when you make a [wiringPi_gpio] object it >> should try to load .l_arm + a >> >>> >>> same goes for the wiringPi_mcp3008.pd_linux object. >>> >>> Any advice greatly appreciated! Rick >>> >>> _______________________________________________ >>> Pd-list@lists.iem.at mailing list UNSUBSCRIBE and >>> account-management -> >>> http://lists.puredata.info/listinfo/pd-list >>> >>> >> -------------- next part -------------- An HTML attachment was >> scrubbed... URL: >> <http://lists.puredata.info/pipermail/pd-list/attachments/20150705/63 53f7af/attachment.html> >> >> >> - ------------------------------ >> >> Subject: Digest Footer >> >> _______________________________________________ Pd-list mailing >> list Pd-list@lists.iem.at to manage your subscription (including >> un-subscription) see http://lists.puredata.info/listinfo/pd-list >> >> >> ------------------------------ >> >> End of Pd-list Digest, Vol 124, Issue 20 >> **************************************** >> > > _______________________________________________ > Pd-list@lists.iem.at mailing list UNSUBSCRIBE and > account-management -> http://lists.puredata.info/listinfo/pd-list > -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAEBAgAGBQJVmafQAAoJEOuluecjw8GULw0H/ijuX3hwgBicL9rxpm4mlY+X k/0ZsxvSnyR9Ho99IPQ3BQAJCN7Ib9LabBXxz/7yhpYRo2nqg0HycqPFRVs80nHh WeODbWcz/Shw70NF1AAb3PFQ1HctEwnnK5gs6eMkenPSLZTGolwUXMhhcmiom8WU jBaLEsZ/XPVSDcIlJaLksEW/c+j5iz7ijlcMYV0us5vwY5s3Eezw/dFhi60rf20y gAbbvIOfeulrkpw3SXrXFOZ9juOKSDS3k4+w0mdAcWbVWDsHKL5VQNf9fEkVG1ow DEhBBlbvWfAJ5DH693prqUOPhzqr/0U19tSj+edOdB5rf8wV9xK1rGABKmDr3nU= =ysPk -----END PGP SIGNATURE----- _______________________________________________ Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list