Pi 2 is a different architecture than the Pi (ARMv7 vs ARMv6 - huge changes for floating point etc). Try the Pd on Miller's site compiled for the UDOO - should run fine.
On Mon, Jul 6, 2015 at 1:42 PM, Rick Snow <ricks...@gmail.com> wrote: > Just to clarify: This is a Raspberry Pi 2 I am using. Maybe it needs a > different architecture? > > I tried renaming as wiringPi_gpio.pd_linux then when instantiating the > object it crashes pd. > > i really appreciate the suggestions. Hopefully this will help some other > folks as well. > > cheers, > Rick > > > On Mon, Jul 6, 2015 at 1:11 PM, Antoine Villeret < > antoine.ville...@gmail.com> wrote: > >> hum, strange, >> >> I was pretty sure that pd loads l_arm on RPi, >> >> btw, did you try to rename the .l_arm in .pd_linux ? >> >> + >> a >> >> -- >> do it yourself >> http://antoine.villeret.free.fr >> >> 2015-07-05 23:53 GMT+02:00 Rick Snow <ricks...@gmail.com>: >> >>> Thanks Antoine. >>> >>> The pi2 does not seem to be looking for .l_arm >>> When I try to load the object with verbose checked I get: >>> tried /home/pi/pd-externals/wiringPi_gpio.l_i386 and failed >>> tried /home/pi/pd-externals/wiringPi_gpio.l_i386 and failed >>> tried /home/pi/pd-externals/wiringPi_gpio.l_i386 and failed >>> tried /usr/local/lib/pd-externals/wiringPi_gpio.l_i386 and failed >>> tried /usr/lib/puredata/tcl/../extra/wiringPi_gpio.l_i386 and failed >>> tried /usr/lib/pd/extra/wiringPi_gpio.l_i386 and failed >>> tried /home/pi/pd-externals/wiringPi_gpio.pd_linux and failed >>> tried /home/pi/pd-externals/wiringPi_gpio.pd_linux and failed >>> tried /home/pi/pd-externals/wiringPi_gpio.pd_linux and failed >>> tried /usr/local/lib/pd-externals/wiringPi_gpio.pd_linux and failed >>> tried /usr/lib/puredata/tcl/../extra/wiringPi_gpio.pd_linux and failed >>> tried /usr/lib/pd/extra/wiringPi_gpio.pd_linux and failed >>> tried /home/pi/pd-externals/wiringPi_gpio/wiringPi_gpio.l_i386 and failed >>> tried /home/pi/pd-externals/wiringPi_gpio/wiringPi_gpio.l_i386 and failed >>> tried /home/pi/pd-externals/wiringPi_gpio/wiringPi_gpio.l_i386 and failed >>> tried /usr/local/lib/pd-externals/wiringPi_gpio/wiringPi_gpio.l_i386 and >>> failed >>> tried /usr/lib/puredata/tcl/../extra/wiringPi_gpio/wiringPi_gpio.l_i386 >>> and failed >>> tried /usr/lib/pd/extra/wiringPi_gpio/wiringPi_gpio.l_i386 and failed >>> tried /home/pi/pd-externals/wiringPi_gpio/wiringPi_gpio.pd_linux and >>> failed >>> tried /home/pi/pd-externals/wiringPi_gpio/wiringPi_gpio.pd_linux and >>> failed >>> tried /home/pi/pd-externals/wiringPi_gpio/wiringPi_gpio.pd_linux and >>> failed >>> tried /usr/local/lib/pd-externals/wiringPi_gpio/wiringPi_gpio.pd_linux >>> and failed >>> tried /usr/lib/puredata/tcl/../extra/wiringPi_gpio/wiringPi_gpio.pd_linux >>> and failed >>> tried /usr/lib/pd/extra/wiringPi_gpio/wiringPi_gpio.pd_linux and failed >>> tried /home/pi/pd-externals/wiringPi_gpio.pd and failed >>> tried /home/pi/pd-externals/wiringPi_gpio.pd and failed >>> tried /home/pi/pd-externals/wiringPi_gpio.pd and failed >>> tried /usr/local/lib/pd-externals/wiringPi_gpio.pd and failed >>> tried /usr/lib/puredata/tcl/../extra/wiringPi_gpio.pd and failed >>> tried /usr/lib/pd/extra/wiringPi_gpio.pd and failed >>> tried /home/pi/pd-externals/wiringPi_gpio.pat and failed >>> tried /home/pi/pd-externals/wiringPi_gpio.pat and failed >>> tried /home/pi/pd-externals/wiringPi_gpio.pat and failed >>> tried /usr/local/lib/pd-externals/wiringPi_gpio.pat and failed >>> tried /usr/lib/puredata/tcl/../extra/wiringPi_gpio.pat and failed >>> tried /usr/lib/pd/extra/wiringPi_gpio.pat and failed >>> wiringPi_gpio >>> >>> >>> On 7/5/15, Antoine Villeret <antoine.ville...@gmail.com> wrote: >>> > 2015-07-05 23:00 GMT+02:00 Rick Snow <ricks...@gmail.com>: >>> > >>> >> Dear list, >>> >> >>> >> In addition to having trouble getting pd 46.6 to install on the >>> Raspberry >>> >> Pi 2 I am having trouble compiling the NYU wiringPi objects. >>> >> >>> >> Does anyone know which architecture the Pi 2 requires? l_arm or >>> >> .pd_linux?t >>> >> >>> > both are good candidates >>> > but pd_linux could be of arch i686, x86_64 or arm (or even something >>> else) >>> > >>> >> >>> >> I am able to compile the objects using the provided makefile as an >>> l_arm >>> >> object but when I try to create a .pd_linux object with the makefile >>> >> terminal returns: >>> >> "* No rule to make target 'wiringPi_gpio.pd_linux'. Stop." >>> >> >>> > >>> > run pd with -verbose option and look at pd's console to know what it is >>> > trying to load when you make a [wiringPi_gpio] object >>> > it should try to load .l_arm >>> > + >>> > a >>> > >>> >> >>> >> same goes for the wiringPi_mcp3008.pd_linux object. >>> >> >>> >> Any advice greatly appreciated! >>> >> Rick >>> >> >>> >> _______________________________________________ >>> >> Pd-list@lists.iem.at mailing list >>> >> UNSUBSCRIBE and account-management -> >>> >> http://lists.puredata.info/listinfo/pd-list >>> >> >>> >> >>> > >>> >> >> > > _______________________________________________ > Pd-list@lists.iem.at mailing list > UNSUBSCRIBE and account-management -> > http://lists.puredata.info/listinfo/pd-list > >
_______________________________________________ Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list