i used Serial.write in the arduino sketch so i should be getting 4 8 bit bytes. i will check your examples and see how it goes
r.y ________________________________ De: Alexandros Drymonitis <[email protected]> Enviado: viernes, 23 de octubre de 2015 10:07 a. m. Para: ray Y; PD-list Asunto: Re: [PD] routing serial data Including list too On Fri, Oct 23, 2015 at 8:01 PM, ray Y <[email protected]<mailto:[email protected]>> wrote: the print object at the output of comport (for reference) yeah, that was the first thing i tried but i don't know why it does not work with the serial stream like it does with a normal list. i tried adding commas between the values in the arduino sketch but no chance of splitting the data into each atom in PD [comport] spits values one by one (actually bytes, so if a value is greater than one byte, it will be split, depending on the way you'll print it from the Arduino - Serial.print or Serial.write). you'll have to assemble them into a list (check help patch of [list] to see how to make a growing list), or make a counter and bang it on every output of [comport], pack the [comport] value with the counter value prepended and use [route]. I've made some abstractions to facilitate the communication between the Arduino and Pd, they'll might work for you. There're here https://github.com/alexdrymonitis/Arduino_Pd The [serial_print] abstraction can use the comma as a value delimiter (if you're on Pd-extended, use [serial_print_extended] instead).
_______________________________________________ [email protected] mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
