Cool, is working. a) and b) are happening as you describe them with an Tascam US-4x4 with ASIO.
:) Mensaje telepatico asistido por maquinas. On 9/11/2018 4:12 PM, Christof Ressi wrote: > thanks for testing! seems like it works fine on Windows. BTW, one big fix I > made is that if the audio device gets disconnected (for whatever reason), Pd > will not hang but instead try to reconnect and if that fails, close the > device gracefully and post an error. if you feel like, you can try it out: > > a) just unplug the USB cable and quickly (within about a second) plug it back > in: Pd should automatically reconnect. > b) if you leave it unplugged for a bit longer, Pd will print an error. now > plug the cable back in and toggle DSP off/on: the device should be connected > again. > > Christof > >> Gesendet: Dienstag, 11. September 2018 um 21:04 Uhr >> Von: "Lucas Cordiviola" <[email protected]> >> An: "Christof Ressi" <[email protected]> >> Cc: "pd-lista puredata" <[email protected]> >> Betreff: Re: Aw: Re: [PD] [PD-announce] PD 0.49-0test1 released >> >> Hi Christof, >> >> I think is an OSX issue. Here everything is right on MMIO or ASIO. >> >> NOTE: I'm only using the 64bit Pd. Both distributions on Miller's site >> are 64bit. (I also checked the http://msp.ucsd.edu/Software/ list of files) >> >> >> -- >> >> Mensaje telepatico asistido por maquinas. >> >> On 9/11/2018 1:57 PM, Christof Ressi wrote: >>> Hi Lucas, >>> >>> since you're on Windows, can you check that ASIO works for you in PD >>> 0.49-0test1? just to be sure it's only an issue on OSX. >>> >>> Christof >>> >>> >>> Gesendet: Dienstag, 11. September 2018 um 18:38 Uhr >>> Von: "Alexandre Torres Porres" <[email protected]> >>> An: "pd-lista puredata" <[email protected]> >>> Betreff: Re: [PD] [PD-announce] PD 0.49-0test1 released >>> >>> I'm having issues with the test version: >>> https://github.com/pure-data/pure-data/issues/443 >>> >>> anyone else? >>> >>> Em ter, 11 de set de 2018 às 12:55, José de Abreu >>> <[email protected][mailto:[email protected]]> escreveu: >>> >>> hello, one question i always forget to ask: >>> >>> Why the shortcut to create horizontal slider changed from 0.47 to 0.48? >>> >>> it was shift+ctrl+h and changed to shift+ctrl+j >>> >>> (btw, i'm on linux, ubuntu studio, if it is needed) >>> >>> >>> >>> Em ter, 11 de set de 2018 às 12:14, José de Abreu >>> <[email protected][mailto:[email protected]]> escreveu:Liam, you >>> can read about all the new commands here >>> https://github.com/pure-data/pure-data/pull/374[https://github.com/pure-data/pure-data/pull/374] >>> >>> And triggerize isn't "documented" in there, you can use it with ctrl+t in >>> an object that has fanouts (and then if you need you can use swap >>> connections to organize all the cords after) >>> >>> >>> >>> >>> >>> >>> Em Ter, 11 de set de 2018 11:35, Liam Goodacre >>> <[email protected][mailto:[email protected]]> escreveu: >>> >>> I'm thrilled about some of these updates! Infinite undoing, [savestate] and >>> backslashes are really great additions. >>> >>> Here are a couple of notes from my first half-hour playing around with it. >>> >>> >>> I'm getting a lot of "zexy: already loaded" error messages. It seems that >>> they come every time you load a new abstraction with [declare -lib zexy] in >>> it. Is this a bug, or has the expected usage of [declare] changed?Are the >>> backslashes working as intended? If I print [\; \; \$ \$ \, \,( I get "; >>> \\; $ $ \\, \\,". I'm not sure what the exact usage is supposed to be, but >>> this output seems confusing.Also, is there a guide to the new intelligent >>> patching features? I've seen the videos, but would like to be able to study >>> it in more detail. >>> ------------------------------------------------------------ >>> >>> From: Pd-list >>> <[email protected][mailto:[email protected]]> on >>> behalf of Miller Puckette <[email protected][mailto:[email protected]]> >>> Sent: 11 September 2018 06:23 >>> To: [email protected][mailto:[email protected]] >>> Subject: [PD] [PD-announce] PD 0.49-0test1 released >>> >>> >>> The first test version of Pd 0.49-0 is available on >>> http://msp.ucsd.edu/software.htm[http://msp.ucsd.edu/software.htm] >>> or (source only) via github: >>> https://github.com/pure-data/pure-data[https://github.com/pure-data/pure-data] >>> >>> cheers >>> Miller >>> >>> >>> >>> _______________________________________________ >>> Pd-announce mailing list >>> [email protected][mailto:[email protected]] >>> https://lists.puredata.info/listinfo/pd-announce >>> _______________________________________________ >>> [email protected][mailto:[email protected]] mailing list >>> UNSUBSCRIBE and account-management -> >>> https://lists.puredata.info/listinfo/pd-list[https://lists.puredata.info/listinfo/pd-list]_______________________________________________ >>> [email protected][mailto:[email protected]] mailing list >>> UNSUBSCRIBE and account-management -> >>> https://lists.puredata.info/listinfo/pd-list[https://lists.puredata.info/listinfo/pd-list]_______________________________________________ >>> [email protected][mailto:[email protected]] mailing list >>> UNSUBSCRIBE and account-management -> >>> https://lists.puredata.info/listinfo/pd-list[https://lists.puredata.info/listinfo/pd-list]_______________________________________________ >>> [email protected] mailing list UNSUBSCRIBE and account-management -> >>> https://lists.puredata.info/listinfo/pd-list[https://lists.puredata.info/listinfo/pd-list] >> _______________________________________________ [email protected] mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
