Dan, After reading your reply to a separate thread, I took a look at your MrPeach to vanilla OSC patch here:
https://github.com/danomatika/BangYourHead/tree/master/6.Communication <https://github.com/danomatika/BangYourHead/tree/master/6.Communication> I am trying to adapt your patch to use the TouchOSC app from my iPhone. However, I am running in to a road block. Everything works as expected until the output of [list trim]. At that point, I can print the data but unable to route the data further. The printed message seems fine; it is usually something like: 1 toggle1 1. (This message is the result of turning the first toggle on page 1 on.) If I send this message “1 toggle1 1” to a [route 1], I expect the message toggle1 1 to come out of the first outlet of route, however, nothing comes out of the first outlet. My patch looks like this: [listen 8000( | | [netrecieve -u -b] | | [oscparse] | | [list trim] | | [route 1] I’d like to have a [route 1 2 3 4] to separate the data coming from the various pages in the OSC app. From there, I’d like to further direct the data using [route fader1 fader 2 toggle1 toggle 2]. Thanks for any help, Mitch
_______________________________________________ [email protected] mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
