There is *no* universal latency value for all situations. Generally, the more “spikey“ your patch is (lots of large ffts, occasional heavy computations), the more latency you need. On the same machine, one patch might need 5 ms and another patch might need 50 ms. The only way to know is test and listen.
> Gesendet: Freitag, 27. September 2019 um 19:38 Uhr > Von: "Lucas Cordiviola" <[email protected]> > An: "[email protected]" <[email protected]> > Betreff: Re: [PD] stability of PD on Windows? > > 3) set Delay(msec): 6ms > > Here use 12ms. > > I have just tested it with 2 soundcards. (I remember a couple of years ago > 6ms was Ok, but now is 12ms). > > > -- > > Mensaje telepatico asistido por maquinas. > > On 9/27/2019 12:55 PM, Martin Peach wrote: > On Fri, Sep 27, 2019 at 7:43 AM Lucas Cordiviola > <[email protected]<mailto:[email protected]>> wrote: > > Hi Scott, > > Are you using ASIO drivers? > > If not you can try this setting which normally works on most soundcards: > > 1) Switch off DSP. > > 2) go to menu: media/ASIO(via port audio) > > 3) set Delay(msec): 6ms > > 4) set Block size : 256 > > 5) On the i/o devices pull-down menu select your "ASIO:<soundcard name>" > > > For me the audio is distorted unless I also tick "Use Callbacks". On Pd 0.50 > this works very well until I try to quit Pd or close a window. I am able to > stop the audio but all the windows stay open. I need to use Task Manager to > kill the process. > > Martin > > > > > _______________________________________________ > [email protected]<mailto:[email protected]> mailing list > UNSUBSCRIBE and account-management -> > https://lists.puredata.info/listinfo/pd-list > > _______________________________________________ > [email protected] mailing list > UNSUBSCRIBE and account-management -> > https://lists.puredata.info/listinfo/pd-list > _______________________________________________ [email protected] mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
