Cyrille, thanks for your answer. I have not seen the sense to send a simple patch as it would not show the behaviour of the rendered Gem window under wsl2. Anyway, I have to use both Windows and subsystem Linux as on Windows does not work the shell or command objects while under Linux the above mentioned [width( command to the 2d shape objects such as triangle, rectangle or circle.
Thanks for your support anyway. Best, Popesz On Thu, Sep 21, 2023 at 5:10 PM cyrille henry <[email protected]> wrote: > hello, > > ok, thanks for the screenshot. (i still think a patch is easier to share > than a screenshot) > > Since nothing have been changed in this part of Gem this last 10 years, it > is safe to assume that the difference between your 2 computers is not > related to Gem. > So, as Iohannes say, the problem is probably on the openGL implementation, > certainly because of WSL. > I never had this problem on a ubuntu computer with old intel GPU. > > I'm sorry , but I have no solution to offer exept not using WSL > cheers > > > > > > Le 20/09/2023 à 11:42, Csaba Láng a écrit : > > Cyrille, > > > > I am attaching the screenshot from my both system installed: > > Screenshot 2023-09-20 113857.png > > > > The top line is the windows based Pd, the bottom line is from the wsl2 > Ubuntu. width 5 was applied on both rectangles. No error message printed in > the console. > > I hope it clears your doubts. > > Let me know if you need anything else at this point. > > Best, > > Popesz > > > > On Wed, Sep 20, 2023 at 10:34 AM Csaba Láng <[email protected] > <mailto:[email protected]>> wrote: > > > > You misunderstood me. I did use a simple patch and of course I used > the width message correctly to the first inlet of the rectangle or circle > objects with numbers from 1 to 7. > > Under windows works correctly. > > > > On Wed, 20 Sep 2023 at 10:29, cyrille henry <[email protected] <mailto: > [email protected]>> wrote: > > > > > > > > Le 20/09/2023 à 09:39, Csaba Láng a écrit : > > > I have found this discussion on the web. > > > > > > https://github.com/microsoft/WSL/issues/2855 < > https://github.com/microsoft/WSL/issues/2855> < > https://github.com/microsoft/WSL/issues/2855 < > https://github.com/microsoft/WSL/issues/2855>> > > > Does it take me closer to make it work? > > > I have a NUC i9 Beast Canyon computer with the integrated > graphic card in it https://simplynuc.com/beast-canyon/ < > https://simplynuc.com/beast-canyon/> <https://simplynuc.com/beast-canyon/ > <https://simplynuc.com/beast-canyon/>> > > > > > > Surely I have tried the simplest patch from the > rectangle-help.pd. Tha was my first to try > > the rectangle-help patch did not include a width message! > > It may look silly, but I want to be 100% sure that you are using > the width message correctly before blaming anything else. > > Since you refuse to provide a simple patch that reproduce the > problem on your computer, I can't confirm the problem and will not > investigate further. > > > > Cheers > > > > > > > > > > On Wed, Sep 20, 2023 at 9:13 AM Csaba Láng < > [email protected] <mailto:[email protected]> <mailto: > [email protected] <mailto:[email protected]>>> wrote: > > > > > > Indeed too complicated, especially taking into account > that I have something like 100 patches using the same thick lines. So it is > not Gem related according to you but openGL? > > > > > > > > > On Wed, Sep 20, 2023 at 8:29 AM cyrille henry < > [email protected] <mailto:[email protected]> <mailto:[email protected] <mailto: > [email protected]>>> wrote: > > > > > > hello, > > > > > > The width message is working as expected here. > > > GEM: ver: 0.94.git v0.94-351-g2ba06167 > > > GEM: compiled on Jan 12 2023 > > > > > > Can you send the test patch you are using, or try the > curve-help file and tell us if the width message is working? > > > > > > if it's not a patch problem, it's the hardware that > can't interpret this message. What is your GPU? > > > > > > cheers > > > C > > > > > > > > > Le 19/09/2023 à 23:33, Csaba Láng a écrit : > > > > By the way, the same issue with the circle object. > [width $1( is just ignored with the draw line message. > > > > > > > > On Tue, Sep 19, 2023 at 11:15 PM Csaba Láng < > [email protected] <mailto:[email protected]> <mailto: > [email protected] <mailto:[email protected]>> <mailto: > [email protected] <mailto:[email protected]> <mailto: > [email protected] <mailto:[email protected]>>>> wrote: > > > > > > > > You are right, wrong word I used. I meant > installing Gem 0.94 from Deken. > > > > > > > > On Tue, Sep 19, 2023 at 11:13 PM IOhannes m > zmölnig <[email protected] <mailto:[email protected]> <mailto:[email protected] > <mailto:[email protected]>> <mailto:[email protected] <mailto:[email protected]> > <mailto:[email protected] <mailto:[email protected]>>>> wrote: > > > > > > > > On 9/19/23 22:54, Csaba Láng wrote: > > > > > Hi list, > > > > > > > > > > I have a windows system with wsl2 > Ubuntu distro on it. Installing on the > > > > > ubuntu subsystem pd and compiling Gem > from Dekken > > > > > > > > i'm not sure what you mean with "compiling > Gem from deken"...deken is a > > > > way to deliver pre-built binaries, nothing > to compile. > > > > > > > > > > > > , the rectangle object > > > > > does not understand the [width $1( > message > > > > > > > > what exactly do you mean with "does not > understand the message"? > > > > > > > > > > > > gfmdsa > > > > IOhannes > > > > > _______________________________________________ > > > > [email protected] <mailto:[email protected]> > <mailto:[email protected] <mailto:[email protected]>> <mailto: > [email protected] <mailto:[email protected]> <mailto: > [email protected] <mailto:[email protected]>>> mailing list > > > > UNSUBSCRIBE and account-management -> > https://lists.puredata.info/listinfo/pd-list < > https://lists.puredata.info/listinfo/pd-list> < > https://lists.puredata.info/listinfo/pd-list < > https://lists.puredata.info/listinfo/pd-list>> < > https://lists.puredata.info/listinfo/pd-list < > https://lists.puredata.info/listinfo/pd-list> < > https://lists.puredata.info/listinfo/pd-list < > https://lists.puredata.info/listinfo/pd-list>>> > > > > > > > > > > > > _______________________________________________ > > > > [email protected] <mailto:[email protected]> > <mailto:[email protected] <mailto:[email protected]>> mailing list > > > > UNSUBSCRIBE and account-management -> > https://lists.puredata.info/listinfo/pd-list < > https://lists.puredata.info/listinfo/pd-list> < > https://lists.puredata.info/listinfo/pd-list < > https://lists.puredata.info/listinfo/pd-list>> > > > > > > > > > > > > _______________________________________________ > > > [email protected] <mailto:[email protected]> <mailto: > [email protected] <mailto:[email protected]>> mailing list > > > UNSUBSCRIBE and account-management -> > https://lists.puredata.info/listinfo/pd-list < > https://lists.puredata.info/listinfo/pd-list> < > https://lists.puredata.info/listinfo/pd-list < > https://lists.puredata.info/listinfo/pd-list>> > > > > > > > > > _______________________________________________ > > > [email protected] <mailto:[email protected]> mailing > list > > > UNSUBSCRIBE and account-management -> > https://lists.puredata.info/listinfo/pd-list < > https://lists.puredata.info/listinfo/pd-list> > > > > > > > > _______________________________________________ > > [email protected] <mailto:[email protected]> mailing list > > UNSUBSCRIBE and account-management -> > https://lists.puredata.info/listinfo/pd-list < > https://lists.puredata.info/listinfo/pd-list> > > > > > > _______________________________________________ > > [email protected] mailing list > > UNSUBSCRIBE and account-management -> > https://lists.puredata.info/listinfo/pd-list > > > > _______________________________________________ > [email protected] mailing list > UNSUBSCRIBE and account-management -> > https://lists.puredata.info/listinfo/pd-list >
_______________________________________________ [email protected] mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
