> > >> - Trying to run a small granular patch like this >> <https://github.com/yannseznec/humanCall> or a sampler/looper patch like >> this <https://github.com/yannseznec/soundDestroyer> > > when you say "like this" do you mean, that exactly these two patches > fail? (I'm just trying to make sure that if I test with these patches it > actually makes sense) > > > Hello Yann, > > For testing them on my RPi 400 / RPi OS 11 32-bit / Pd 0.54.1, which Pd > file(s) to download from your GIT site? > > Then if more than one Pd file, which one for launching 'humanCall' and > 'soundDestroyer'? > > ————— I’ll answer both of these questions at once…to be more clear, the most obvious test of the Pi issues I was having is to launch “humanCaller_test.pd” from this project: https://github.com/yannseznec/humanCall It is a granular patch that will just play a stream of grains on startup. When I was encountering issues, this patch would stop working after somewhere between 30-90 seconds, and print many instances of the error “restart alsa output alsa xrun recovery apparently failed”. I am no longer having this issue, after compiling Pd 0.54.1 myself on the 32 bit Pi OS 11. I am not entirely sure, but I think I may have mistakenly been using the 64 bit Pi OS 11 when I was having the issues. I am also starting to think that there may be simply too many variables here to actually identify any issues, so I apologise for any goose-chasing I am encouraging.
_______________________________________________ [email protected] mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
