Hi Bao, I'm the owner of that site, so I've just re-instated http://members.iinet.net.au/~celsim/mz6/cablerelease.htm Michel's site is far more complete (as you have seen) but you may find the graphic useful. Note that (for me) a 2.5mm jack doesn't fit. You need the really small 2mm jack (found as a headphone accessory for many mobile phones). Also, Michel's right, the Cannon plug fits as well, but I wanted to make my own so I had the flexibility to used whatever switches and cable lengths I wanted (I've tested mine on a cable up to 15m). Let us know how it goes. Merry Christmas, Simon
Girts a �crit: > Hello! > > I was looking for some instructions how to make my own cable release > for > ZX-L, searched the web, but it didn't turn up anything, except a link in > pdml faq: http://members.iinet.au/~celsim/mz6/cablerelease.htm, which > does not work. > > Can anyone point me to a site or give some instructions how to make > the > cable release? I guess that the only thing i need is what type of > connector it has and what each pin does, as the 3-wire concept is > probably the same. I have added schema for cable release for MZ-6 on my French web: http://perso.wanadoo.fr/krg/ page: http://perso.wanadoo.fr/krg/Photo/bricolage.htm No MZ-6 available so not tested ! You can use a Canon cable for the MZ-6 Michel -----Original Message----- From: Girts [mailto:[EMAIL PROTECTED]] Sent: Monday, 23 December 2002 5:45 PM To: [EMAIL PROTECTED] Subject: MZ-6 (ZX-L) cable release howto? Hello! I was looking for some instructions how to make my own cable release for ZX-L, searched the web, but it didn't turn up anything, except a link in pdml faq: http://members.iinet.au/~celsim/mz6/cablerelease.htm, which does not work. Can anyone point me to a site or give some instructions how to make the cable release? I guess that the only thing i need is what type of connector it has and what each pin does, as the 3-wire concept is probably the same. Thanks! Bao, a new Pentax user from Latvia
