IIRC Isn't that what happens as the battery starts to get exhausted? Anyway, if the sekonic agrees with the K1000 but not with the SP500 then the SP500 is probably off (though there is a chance both the sekonic and K1000 are aff by the same amount). Another thing to check is the lens on the SP500 and make sure the blades aren't sluggish, if they aren't stopping down right then that can seem to be erratic metering. Todd At 07:23 AM 3/19/01 -0500, you wrote: >Hi Todd >I seem to have noticed lately the meter reading on a subject seemed to change 1-2 stops > from when i first read it to when i would double check it prior to the next shot on the same >subject with camera in same location.Also the lab i use in town mentioned the last roll of >kodak T 400cn they had to play with exposure a bit.However when i check it against the >meter in my k 1000 it is pretty close. > >Dave - This message is from the Pentax-Discuss Mail List. To unsubscribe, go to http://www.pdml.net and follow the directions. Don't forget to visit the Pentax Users' Gallery at http://pug.komkon.org .
