Tanya, forgot to mention that along with the flash itself, the camera's flash setting needs to be set to W HS - wireless and high speed. This is done by repeatedly pressing the flash button until the two symbols show up.
-- Best regards, Bruce Tuesday, March 23, 2004, 7:39:21 AM, you wrote: BD> Last question - As to the usage between camera and flash (AF360FGZ), set the camera as BD> if you were NOT using a flash, so if you were shooting manually, set BD> shutter speed and f stop, or in one of the automatic modes, set either BD> the shutter speed or f stop. On the flash, when the lower synch slider is BD> all the way to the right (HS), you can push the S button and rotate BD> the dial to set the amount of flash you desire compared to the ambient BD> light. So, if you want 1 stop less flash than ambient, set the flash BD> to -1. From then on the flash will respond with 1 stop less light BD> than the ambient reading in the camera. Basically the flash output is BD> lowered or raised based on the compensation setting on the flash.
