I believe a 'Pentax only' solution has yet to be found. My current setup is as follows:
>From right to left: Camera - extension ring - M42 to K adapter - 4/50 Macro Takumar - reverse ring - bellows (reverse mounted) - a slide holder (cannibalised from an old slide copier and machined to fit the bellows). Here is how it looks: www.mynetcologne.de/~nc-kellersv2/187.JPG I doubt the Soligor copier is nearly as good optically as is the Takumar, but certainly easier to handle. Sven -----Urspr�ngliche Nachricht----- Von: William Robb [mailto:[EMAIL PROTECTED] Gesendet: Dienstag, 20. April 2004 07:47 An: [EMAIL PROTECTED] Betreff: Re: DSLR slide duplicator ----- Original Message ----- From: "Anthony Farr" > William, > > I remember that thread. The pertinant remark in your message was that the > execution of the theory was still (at that time) in the future. Results are > still to be shared AFAIK. I think the best lens I have for this at the moment is the 100mm bellows. I will dig out the duping equipment in a day or so and see if I can't make something work. Mostly what I want to know is how long an extension I need for the duplicator, and if I can pirate a long bellows from another peice to make it light tight. > > However the Soligor option is on the market, at least in Germany, as I > write. > For some reason, I didn't makage to see that page. William Robb
