Like a dufus I didn't proofread...
It should have said "lockup mirror option" not "lockup sensor".
Tom C.
From: "Tom C" <[EMAIL PROTECTED]> Reply-To: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: RE: *istD CCD cleaning Date: Tue, 22 Jun 2004 15:39:24 -0600
I have done it once. From memory...
1. Go the sensor cleaning section on the color LCD Menu
2. Choose the lockup sensor option
3. I used a can of compressed air (note that almost all say not safe for camera mirrors. I don't know why that is, especially if it is safe for slides, negs, etc.). I know a chemical can be dispersed in the spray if the can is tilted, depending in brand of air. I always blow compressed air on my wrist before spaying on a lens, or in the camera, making sure that I see nothing visible in the stream of air.
4. I sprayed for about 10 seconds.
5. Turn camera power switch to off
6. Put lens on.
Tom C.
From: Kevin Waterson <[EMAIL PROTECTED]> Reply-To: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: *istD CCD cleaning Date: Wed, 23 Jun 2004 07:08:25 +1000
Does anyone have a blow by blow description of cleaning the CCD on the *istD?
Kind regards Kevin
-- ______ (_____ \ _____) ) ____ ____ ____ ____ | ____/ / _ ) / _ | / ___) / _ ) | | ( (/ / ( ( | |( (___ ( (/ / |_| \____) \_||_| \____) \____) Kevin Waterson Port Macquarie, Australia
