Hi Jens Unfortunately IIRC the screws do not line up from one to another, buying a tap to cut new threads was quite expensive and quite a delicate operation. I got the mating surfaces so good that when I glued them they stuck instantly....... sh*t ever so slightly out :)
John ---------- Original Message ----------- From: "Jens Bladt" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Mon, 14 Feb 2005 00:56:24 +0100 Subject: RE: right angle finder > Thanks, John. > That sounds a little difficult. On my refconverter there's a metal > mount, fitted with small screws. I was imgining I could screw on a > wider one - from an eyepiece - using the original screws. > Alternativly I'll just cut of a little of the flanges (it's a matter > on 1-2mm at eachs side, I believe). I really should do this, since > I'll never use the K1000 for macro or repro photography anyway. I > want TTL flash option, which to me means using the Super A or the > *ist D. > > Jens Bladt > mailto:[EMAIL PROTECTED] > http://hjem.get2net.dk/bladt > > -----Oprindelig meddelelse----- > Fra: John Whittingham [mailto:[EMAIL PROTECTED] > Sendt: 13. februar 2005 22:18 > Til: [email protected] > Emne: RE: right angle finder > > Before I found the refconverter A at a reasonble price I superglued the > fitting from the eyecup M to the refconverter II (K). The biggest problem > was > removing the ring from the eyecup and getting it perfectly level to mate > with > the converter, took a little of my workshop skills and a fine file. However > if you place it correctly it works very well even on the A series bodies > allowing full view of the viewfinder/metering. It looks a bit > unsightly but I've kept mine as a spare. > > John > > ---------- Original Message ----------- > From: "Jens Bladt" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Sun, 13 Feb 2005 21:24:17 +0100 > Subject: RE: right angle finder > > > I have an old one - for M or K kameras (fits my K1000). > > I believe I can make it fit both A and D bodies if I kill a couple of > > eye-cups to make exchangeable eyepiece-flanges/-mounts. > > I just haven't done this yet. Has anybody tried this? > > All the best > > > > Jens Bladt > > mailto:[EMAIL PROTECTED] > > http://hjem.get2net.dk/bladt > > > > -----Oprindelig meddelelse----- > > Fra: Fred [mailto:[EMAIL PROTECTED] > > Sendt: 12. februar 2005 03:18 > > Til: Godfrey DiGiorgi > > Emne: Re: right angle finder > > > > > Does anyone know whether there is a Pentax right angle finder attachment > > > that works with the *ist DS? I've seen a couple of Pentax RAFs on Ebay > > > but only for older generation cameras. > > > > I would think that both the Refconverter-M and the Refconverter-A would > > work on the *ist DS. > > > > Fred > ------- End of Original Message ------- ------- End of Original Message -------
