Flash compensation/fill flash with Super A: I use this: Use flash-automatics - not TTL. Cheat the ASA setting (setting it higher = lower output) on the flash. Regards
Jens Bladt mailto:[EMAIL PROTECTED] http://hjem.get2net.dk/bladt -----Oprindelig meddelelse----- Fra: Joe Wilensky [mailto:[EMAIL PROTECTED] Sendt: 14. marts 2005 17:37 Til: [email protected] Emne: Re: Using the Super Program So what is the "obvious" flash compensation? I assume use manual mode, but dial in exposure compensation and then use the meter to reach -1 instead of +-0 ? I have also used flash on auto instead of TTL and just dialed the f-stop to a stop or two smaller than the flash figured I was using. Of course, that often bumps into the flash synch speed. Joe > and flash compensation is only >"obvious" once you've already learned it (and IIRC not described >in the manual -- it's also the one clumsy operatin on that body), > And finding out >how flash compensation works on the Super Program reminds me of >looking at the hexadecimal machine code on the VAX and realizing >that the "immediate" addressing mode was implemented in the >hardware as "auto-increment indirect using the program counter". > > -- Glenn
