I don't have one, but you can download one from here: www.pentaximaging.com/customer_care/manuals_literature
Don > -----Original Message----- > From: Trevor Bailey [mailto:[EMAIL PROTECTED] > Sent: Wednesday, March 23, 2005 5:54 AM > To: [email protected] > Subject: RE: Well I did it, a PZ-1p > > > G'day Don. > > I picked up a PZ-1p off Ebay on Sunday for $200 USD. > I am still to receive it. > > But it has no Manual for it. > Do you or anyone else on the list have a Manual they would want to sell? > > Please PM If anyone is interested. > Thanks. > Hooroo. > Regards, Trevor > Grafton > Australia > > > -----Original Message----- > From: Don Sanderson [mailto:[EMAIL PROTECTED] > Sent: Wednesday, 23 March 2005 10:17 PM > To: [email protected] > Subject: RE: Well I did it, a PZ-1p > > > I use a product called "Pliobond" made by Ashland Inc. > It's like contact cement but stays pliable and can be, > with some effort, removed. > Looking at my SF-1 and SF-1n bodies, 2 have no rubber > on the grip, the other 2 have the rubber attached > with the same double sided tape camera "leatherette > uses. > Pliobond or contact cement should work fine. > Clean both with alcohol first. > > Does anyone know if these came either with or without > the rubber or are 2 of mine just missing? > The 2 without are very clean, like there never was > any rubber at all. > > Don > > > > -----Original Message----- > > From: Markus Maurer [mailto:[EMAIL PROTECTED] > > Sent: Tuesday, March 22, 2005 9:48 PM > > To: [email protected] > > Subject: RE: Well I did it, a PZ-1p > > > > > > Hi Don > > any advice on what would be the best type of glue for the plastic > > covering of the grip of the SFXn? greetings > > Markus > > > > > >
