D'oh

"evident" not "evedent"

DS

On Apr 5, 2005 10:34 AM, David Savage <[EMAIL PROTECTED]> wrote:
> Seems to be some CA in both the DA samples, which isn't evedent in the
> M28 shots.
> 
> Dave S
> 
> On Apr 5, 2005 9:48 AM, Don Sanderson <[EMAIL PROTECTED]> wrote:
> > Here are the left edges at 100%:
> > http://www.donsauction.com/pdml/28vsDA/LeftEdge.htm
> >
> > Looks like the DA outdid the M28 by a bit on the edge.
> >
> > The RAWs are uploading, should be done in about a week! ;-)
> >
> > They *will* be:
> > http://www.donsauction.com/pdml/28vsDA/DA_4.0.PEF
> > http://www.donsauction.com/pdml/28vsDA/DA_5.6.PEF
> > http://www.donsauction.com/pdml/28vsDA/M_3.5.PEF
> > http://www.donsauction.com/pdml/28vsDA/M_5.6.PEF
> >
> > 52MB total. (Do RAW files zip well?)
> >
> >
> > Don
> >
> > > -----Original Message-----
> > > From: Rob Studdert [mailto:[EMAIL PROTECTED]
> > > Sent: Monday, April 04, 2005 8:24 PM
> > > To: [email protected]
> > > Subject: RE: The DA retested and loved again!
> > >
> > >
> > > On 4 Apr 2005 at 20:17, Don Sanderson wrote:
> > >
> > > > These were shot as RAW and the same settings used for
> > > > each conversion.
> > >
> > > Why I asked about that was that the sharpening seemed a little aggressive.
> > >
> > > > I then cropped, enlarged and saved for web, also keeping
> > > > settings the same.
> > > > To crop I used the method Jostein used yesterday, set
> > > > rulers to pixels, draw a crop box correctly sized and
> > > > then align it.
> > >
> > > Just a tip, if you start recording an "action" when you make your
> > > first crop
> > > you can then apply that "action" to each subsequent image, makes
> > > producing
> > > uniform crops/post processing really easy.
> > >
> > > > I can put the RAW files up for d'load if you'd like to
> > > > play with them.
> > >
> > > That would be great, thanks.
> > >
> > > Cheers,
> > >
> > >
> > > Rob Studdert
> > > HURSTVILLE AUSTRALIA
> > > Tel +61-2-9554-4110
> > > UTC(GMT)  +10 Hours
> > > [EMAIL PROTECTED]
> > > http://members.ozemail.com.au/~distudio/publications/
> > > Pentax user since 1986, PDMLer since 1998
> > >
> >
> >
>

Reply via email to