Tried that Paul, it didn't help. Thanks anyway.
Dave S On 4/24/05, Paul Sorenson <[EMAIL PROTECTED]> wrote: > Dave - > > Sometimes banding will occur when high speed printing is enabled. > Disable high speed in the printer properties and see if that solves the > problem > > -P > > David Savage wrote: > > G'day PDML'ers > > > > After a year of not being satisfied with my prints, I sat down last > > Sunday and read everything I could find on the subject of colour > > management. Long story short, success, I am now able to produce > > consistent, if not perfect, results. > > > > But... > > > > I've now got problems with blue lines running through all my prints: > > > > http://tinyurl.com/9ub3b > > > > I've run the head cleaning utility so many times I've used half an ink > > cartridge. The nozzle check pattern always comes out clear. The > > banding lessens if I make enough prints, but never really clears up. > > > > I suspect the problem is caused by a clogged print head (please > > correct me if I'm wrong). I'm using an Epson Stylus Photo 935. As most > > no doubt know, unlike Canon & HP inkjet printers the print head isn't > > removable, so fixing the problem isn't all that simple. > > > > So my question is. Who on the list has had similar problems? Were you > > able to clear it, and if so, how did you do it? > > > > Thanks in advance. > > > > Dave > > > > > > > >
