>> Epoxy's good enough for me. I've looked at Kirk's once before, and >> unfortunately their list doesn't include the pair of 58 and 49mm threads >> needed to use the FA50/1.4 with either the FA100/2.8 macro or A*200/4 >> macro. > >Just thinking that, once they are epoxied, one or two small bolts >(2~3mm) would prevent an "unpleasantness".
If you sand the mating surfaces and let the epoxy wrap around the corners a bit the joint should be plenty strong. For extra strength mix some micro fibers into the epoxy. Do not press the joint too tight squeezing all of the epoxy out. Some fast setting "5 minute" epoxies are quite week. Powell
