> > From: Jon M <[EMAIL PROTECTED]> > Date: 2005/07/07 Thu PM 11:17:42 GMT > To: [email protected] > Subject: Re: Re: M135/3.5 doesn't focus to infinity - solutions? > > >>Can you upload some pictures of the disassembly? > > http://jon.beigetower.org/photography/135/135exposed.jpg > > No screws under the bezel.
It _may_ be that it was just the bezel holding the lens group in place. Try tapping the lens into the palm of your hand to see if it falls out. > > Just noticed there's several small screws around the > diameter of the barrel just underneath the focusing > ring - close enough to the edge to see, but too far > under there to angle a screwdriver in on them. > > http://jon.beigetower.org/photography/135/135%20(Medium).jpg > > Could there possibly be some sort of holes in the > focusing ring underneath the rubber grip? How is the > rubber grip removed? Is it just stuck on there, or > glued somehow? Probably just friction and a bit of stretch. You should be able to peel either the front or back over on itself and investigate if there are any screws under there. When you put the rubber back, it will take a few hours to contract and grip again. mike ----------------------------------------- Email provided by http://www.ntlhome.com/
