Hi Herb; I've seen those, they're 3-4 hundred dollars. It would be the perfect thing, I'm going to try to get off cheaper if I can though. My entire heating setup, accurate to 1/2 degree will run about 50 dollars. ;-) I'll have to see if one of the local stores has the aquarium chillers, maybe I can steal an idea or two.
Don > -----Original Message----- > From: Herb Chong [mailto:[EMAIL PROTECTED] > Sent: Friday, July 15, 2005 10:42 PM > To: [email protected] > Subject: Re: Darkroom temperature control. > > > aquarium refrigerated water systems exist, but they are expensive. they > would meet your needs almost exactly. out of the box, they should > be able to > control temperature to within 1 degree F of the correct temperature. > > Herb.... > ----- Original Message ----- > From: "Don Sanderson" <[EMAIL PROTECTED]> > To: "PDML" <[email protected]> > Sent: Friday, July 15, 2005 10:59 PM > Subject: OT: Darkroom temperature control. > > > > I've just purchased the components to design and build some > > precision temperature controls for darkroom chemistry. > > I have the heating part down but am at a bit of a loss as to > > what to use for cooling the different solutions. > > Other than keeping the entire darkroom at 68 degrees or below > > does anyone have any ideas as to how to keep developer, etc. > > at the correct temp? > > Unfortunately the tap water here runs 70-74 degrees at its > > coldest in summer. > > I'd actually like to be able to run at 65 degrees to keep > > developement times long and controllable. > > My only thought is a large container of water in the fridge > > that could be circulated around the bottles and tank. > > > > > >
