A useful old trick from the days before auto flash is to
cover the flash head with a white handkerchef. A rubber band
works well to hold it on. One layer cuts the output down
about one stop, two layes about two stops. Use your usual
guide number and just use one or two layers to reduce your
fill level.
--Tom
"Peifer, William [OCDUS]" wrote:
>
> Paul Warren wrote:
> > I'd now like to learn some more about fill-flash. I understand the basic
> > concept, but I'm confused about equipment. My ZX-M came with the
> > AF201SA flash, but my understanding is that it's not very appropriate
> > for fill flash. If I'm wrong, let me know! Anyway, I'm mostly confused
> > about the terminology surrounding flashes (manual, auto, TTL, non-
> > TTL) and what will and won't work with the ZX-M. Any enlightenment/
> > suggestions on technique/equipment?
>
> Hi Paul,
>
> Welcome to the list! Maybe I can help you out. Hopefully one of the other
> list members can help you out if I lead you astray. Pardon the long
> answer....
>
> MANUAL: You figure out the proper lens aperture and subject distance from
> the flash unit's guide number. For instance, I believe your AF201SA has a
> guide number of 66 (in feet). Provided you are using ASA 100 film, the
> correct lens aperture multiplied by the correct distance-to-subject will be
> equal to the guide number. For example, you might use ASA 100 film, a lens
> set at f/4, and a distance to your subject of about 16 feet. This will give
> you a *fully illuminated* subject. (This is different from fill flash --
> more on that below.) If you use film faster than 100 speed, just multiply
> the guide number for your flash unit by the square root of the speed ratio.
> Thus, for 400-speed film, the guide number would be 66 times the square root
> of (400/100), or 132. You could thus shoot subjects about 32 feet away at
> f/4, or about 16 feet away at f/8, for example.
>
> Just to complicate things further, some flash units will allow you to
> discharge the flash at less than full power. Many of the Sunpak units, for
> instance, allow you to discharge at full power, 1/2, 1/4, or 1/16.
>
> For fill flash, you generally don't want all of the light illuminating your
> subject to come from the flash. Your subject may be partially illuminated
> by the sun or other ambient light, and you just need a little extra to
> partially fill in some of the shadows. If you're shooting people, keep the
> sunlight out of their faces to avoid squinting, etc. From your distance to
> subject, calculate the proper aperture for full flash illumination, then
> stop down the aperture a bit (perhaps a stop or two further, to allow for
> less light on the subject). Using your camera's meter, calculate the
> correct shutter speed to properly expose the background of your scene at the
> aperture you just set your lens to. Hopefully the correct shutter speed
> will be slower than the X-sync speed for your camera (1/100 sec for the
> ZX-M, if I remember correctly). This is where a variable-power flash unit
> sometimes comes in handy.
>
> AUTO: A little sensor on the front of the flash unit measures the flash
> intensity reflected off the subject. When enough light has been detected,
> the flash unit quenches (or shuts off) the flash. Thus, the duration of the
> actual flash will be longer for darker scenes and shorter for lighter
> scenes. You can generally do fill flash with these types of units by either
> setting the film speed dial on the flash unit to a faster film speed than
> you have loaded, or by stopping down your lens a bit further than the
> "correct" aperture displayed on the indicator scale on the flash unit.
>
> TTL: "Through-the-lens" metering. A little sensor inside of your camera
> measures the flash intensity at the film plane. Your camera body would then
> tell the flash unit when to quench the flash. This requires a dedicated
> flash unit, specific for your camera, and a TTL-capable body. If I remember
> correctly, the ZX-M is not capable of TTL metering. Generally, non-TTL
> units are AUTO.
>
> A NOTE ON EQUIPMENT: You may wish to pick up a more versatile flash unit at
> some point. A useful feature to have is a bounce head -- one that can be
> angled from horizontal to vertical. Another useful feature is a swivel head
> -- one that can be rotated from a straight-ahead position to an
> off-to-the-side position. This way, you can bounce the harsh flash off of a
> ceiling or wall to get a more diffused and natural light.
-
This message is from the Pentax-Discuss Mail List. To unsubscribe,
go to http://www.pdml.net and follow the directions. Don't forget to
visit the Pentax Users' Gallery at http://pug.komkon.org .
