I just tried Godfrey's suggested method on this shot & it works very well.
Dave On 9/21/05, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > Excellent shot. Yes, that's obviously the boundary fringing that doesn't > respond to CA correction. Godfrey's method of color blending sounds > interesting. Or you could probably paint over that edge on a 400% blowup. I'd > also burn in the highlight a bit. > Paul > > > > Hi Paul, > > > > I tried that with no luck. Here's the pic in question. Note the temple > > piece of the woman's eye glasses: > > > > http://home.earthlink.net/~scbelinkoff/wob_test.html > > > > Shel > > > > > [Original Message] > > > Wrom: WCONEUQZAAFXIS > > > > > Sometimes it's a result of red and blue chromatic aberration. If so, > > > you can correct it reasonably well by going to the "lens" tab in the > > > RAW converter and adjusting the CA sliders. At other times it seems to > > > be the result of backlight on dark objects, such as branches against a > > > sky and doesn't seem to be affected much by CA adustment. I find this > > > effect is more common to some lenses than others. In situations where > > > it was important to remove the fringe and CA adjustment yields little > > > improvement, I've occasionally resorted to cloning it out after masking > > > or selecting the appropriate area. Lots of work, but it can be done > > > effectively. > > > > > On Sep 21, 2005, at 6:48 AM, Shel Belinkoff wrote: > > > > > > > Any suggestions on how to rid an image of purple fringing ... > > > > > >
