On Thu, 19 Jan 2006 07:58:08 +0100, Lucas Rijnders <[EMAIL PROTECTED]>
wrote:
Op Thu, 19 Jan 2006 01:26:08 +0100 schreef Gianfranco Irlanda
<[EMAIL PROTECTED]>:
Lucas Rijnders <[EMAIL PROTECTED]> wrote:
<snip>
Furthermore, the internal flash symbol starts blinking rapidly
at focal
lenghts under 35mm. I thought the Z1-p's flash covered 28mm?
It depends on the form of the lens. With huge lenses you'll see
the symbol blinking even at longer focal lenghts (again, with
the 24-90 the symbol keeps blinking until the lens is around
40mm...), while with the FA 28/2.8 there's no problem at all.
The FA series (and I guess the F series too) tells the body
about the safe range for the RTF (you'll probably will have
different results - but not too much - with the MZ-50 in this
regard because the flash stands a bit higher than in the Z-1p).
Ah yes, I'd forgotten about that. The FA 28-105 powerzoom isn't exactly
small ;-) I'll check with the FA 28-70/4 tonight: that might be better.
Just checked: You were right, Gianfranco. The FA28-70/4 is good up to
28mm. Phew!
Thanks again,
--
Regards, Lucas
