I note with both the MZ-S and the *ist-D that the AF330FTZ can sit slightly
sideways in the accessory shoe, and this can cause problems with the
connections. I now always make sure that it is in straight before locking
it on.
John Coyle
Brisbane, Australia
----- Original Message -----
From: <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Saturday, April 01, 2006 5:03 AM
Subject: Re: DL TTL flash madness
Sounds like you're getting full manual due to a bad connection. The flash
TTL contact probably isn't connecting properly to the hot shoe. I notice
that I have to be careful fully insert the hot shoe cord of my Pentax
AF400T. Sometimes I even wet it a bit with saliva, which seems to improve
the connection. If the connection is bad, everything is overexposed.
-------------- Original message ----------------------
From: Rick Womer <[EMAIL PROTECTED]>
Paul,
This is weird. I have a Sunpak flash that works
beautifully in TTL mode on my Super Program, PZ-1, and
PZ-1p, and doesn't work worth poop on the
istD--everything is grossly (but variably)
overexposed.
Rick
--- [EMAIL PROTECTED] wrote:
>
> Dario Bonazza wrote:
> s I own the D (which also doesn't work as well as
> the DS with TTL).
>
> In what way doesn't the D work well with TTL? Please
> don't tell my two D cameras, because they both work
> fine with either TTL (AF 400T) or TTL-P (Sigma 500
> Super).
> Paul
>
>
http://www.photo.net/photos/RickW
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
