At 12:22 PM 8/27/2001 -0400, you wrote:
>Are there drawbacks to this method versus using a traditional darkroom?
This *is* the traditional method of developing film.
A darkroom is necessary for conventional printing. If you happen to have
one, it's a convenient place to handle film. If you don't, you can use a
changing bag, or jury rig something else.
tv
> -Rich
>
>
>tom [mailto:[EMAIL PROTECTED]] wrote:
> >
> > At 08:08 AM 8/26/2001 -0400, you wrote:
> > >Tom your response tweaked my interest.Could you quickly explain
> > >the process,might be interested in trying this.
> >
> > *My Abridged Version*
> >
> > - Load your film into a daylight tank
> > - Pour in developer at the prescribed temperature.
> > - Agitate the tank every minute
> > - At the end of the prescribed time, dump out the developer.
> > - Dump in the stop bath.
> > - Agitate for 30 seconds, dump back into bottle if not exhausted.
> > - Rinse with water
> > - Dump in fixer.
> > - Agitate every 30 seconds for 3-5 minutes.
> > - Save or dump fixer
> > - Wash
> > - Hang to dry
> > - Sleeve.
> >
> > Usually takes about 45 minutes per tank.
> >
> > This is a short version...to write down all the minutiae would take a
> > couple of pages, but all the steps are here.
> >
> > tv
>-
>This message is from the Pentax-Discuss Mail List. To unsubscribe,
>go to http://www.pdml.net and follow the directions. Don't forget to
>visit the Pentax Users' Gallery at http://pug.komkon.org .
-
This message is from the Pentax-Discuss Mail List. To unsubscribe,
go to http://www.pdml.net and follow the directions. Don't forget to
visit the Pentax Users' Gallery at http://pug.komkon.org .
