Hi Mike, You can use the AF360FGZ as a standard (non P-TTL) flash by setting it to slave mode 2. To do this you turn the flash on, press and hold the "Light" button until the slave mode appears. Then press the "S" button to change modes. Mode 1 is P-TTL mode 2 is standard slave. Don't forget to change it back!
You can't use the RTF to trigger the others though so either use an AF360 set to A or M or use another flash in manual or auto mode. I hope this helps. Leon http://www.bluering.org.au http://www.bluering.org.au/leon Mike Hamilton wrote: > I'm doing a portraiture lighting course at a community college, and > I'm having some troubles with my 360FGZ flashes and the preflash. > It's making my subjects blink 3/4 of the time, and the 1/4 results in > half-closed eyes. I can't switch the flashes to any mode besides > P-TTL because I'm using them in wireless mode (well, I can switch the > off-camera main flash to A or M, but not the on-camera fill flash). > > Any tips on how to avoid the blinking? > > Thanks > Mike > > > -- > Remember to Breathe -- MichaelHamilton.ca > -- PDML Pentax-Discuss Mail List [email protected] http://pdml.net/mailman/listinfo/pdml_pdml.net
