I feel there are quite a few on this list who have taken up film again, if 
not for everything then at least from time to time.  In my own case, I've 
just shot two films in my MZ-S, and have one running in a Spotmatic.  Last 
week I finally got around to developing a roll from another Spotmatic, which 
was mainly used to test it.

Why?  For me, I just like the results, I don't always need to see them 
immediately, and I'm confident enough in my (used and tested) gear to feel 
that the results will be at least acceptable.  And, I must confess, I have a 
hankering to get out the enlarger and have one of those magical smelly 
hypo-laden printing sessions again!

John Coyle
Brisbane, Australia

----- Original Message ----- 
From: "Shel Belinkoff" <[EMAIL PROTECTED]>
To: "PDML" <[email protected]>
Sent: Sunday, November 05, 2006 10:10 PM
Subject: Another Pentax Story


> Yesterday, while strolling through downtown Kensington, a fellow stopped 
> me
> and commented about the camera I was using.  Well, not so much that, but 
> he
> saw the camera and mentioned he liked to photograph as well, and said that
> he had a few Pentaxes and a lot of lenses.  I showed him that I was using 
> a
> Pentax, and the conversation took off from there.  He's an film user,
> shooting mostly with his LX and earlier Pentax cameras, as well as some 
> med
> format work.  He was somewhat curious about the DSLR, and was quite
> impressed/astonished when he found out that all his old glass (mostly K 
> and
> M lenses) would work on the current crop of digital cameras.  Nonetheless,
> he's sticking with film ;-))
>
> I'm running into more and more film shooters these days, both folks who
> have never moved to digital and those who have but have decided to move
> back to film or incorporate more film use in their photography.
>
>
> Shel
>
>
>
>
> -- 
> PDML Pentax-Discuss Mail List
> [email protected]
> http://pdml.net/mailman/listinfo/pdml_pdml.net 

-- 
PDML Pentax-Discuss Mail List
[email protected]
http://pdml.net/mailman/listinfo/pdml_pdml.net

Reply via email to