With the K100, I'm usually at 3, 100%, but I often oversharpen a bit for effect.
-Adam Godfrey DiGiorgi wrote: > Usually, my sharpening for full or doubled resolution "normal" image > files with Smart Sharpen is pixels: 2.1, 80-90%, basic mode. A > similar result with USM happens at pixels:1.7, 70%, threshold 2. > > Godfrey > > On Nov 24, 2006, at 7:55 PM, Paul Stenquist wrote: > >> I'm speaking of USM> The percentage is irrelevant without reference >> to the pixel size or the threshold. I back way down on the other two. >> Paul >> On Nov 24, 2006, at 10:48 PM, Godfrey DiGiorgi wrote: >> >>> Wow, are you speaking of USM or Smart Sharpening? >>> >>> With the DS bodies, I have almost never applied more than 80-90% >>> sharpening with Smart Sharpening. More than that causes artifacts and >>> problems in most photos. A very few have required pounding up the >>> sharpening to "crunchy" for a print. >>> >>> Godfrey >>> >>> On Nov 24, 2006, at 6:00 PM, Paul Stenquist wrote: >>> >>>> I've used well over 100% many times. With the *istD photos, I >>>> generally used 261% at 1.5 pixels and a threshold of 11. With the >>>> K10D I'm still experimenting, but I seem to be coming in at about >>>> 100%, 1.2 pixels and a threshold of 19. It's all a matter of >>>> subjective taste. But I do look for artifacts and dial back if I see >>>> anything unhappy. >>> >>> -- >>> PDML Pentax-Discuss Mail List >>> [email protected] >>> http://pdml.net/mailman/listinfo/pdml_pdml.net >> >> -- >> PDML Pentax-Discuss Mail List >> [email protected] >> http://pdml.net/mailman/listinfo/pdml_pdml.net > > -- PDML Pentax-Discuss Mail List [email protected] http://pdml.net/mailman/listinfo/pdml_pdml.net
