So are you saying that the sensor moves vertically or horizontally, or both, but remains parallel to the sensor?
John On Mon, 11 Dec 2006 17:17:10 -0000, John Francis <[EMAIL PROTECTED]> wrote: > > The SR is (mostly) done by a translation, not a rotation; that > has the same amount of travel for all the parts of the sensor > (and does not depend on sensor size). There is no fulcrum. > > On Mon, Dec 11, 2006 at 11:54:28AM -0000, John Forbes wrote: >> The sensor will move through the same angle for any given lens, but as >> the >> APS-C sensor is smaller than a 35mm sensor, the distance travelled by >> the >> edge that is furthest from the fulcrum will be shorter. >> >> John >> >> On Mon, 11 Dec 2006 11:00:23 -0000, Digital Image Studio >> <[EMAIL PROTECTED]> wrote: >> >> > On 11/12/06, Rod Connan <[EMAIL PROTECTED]> wrote: >> > >> >> The large movement available in the K10D sensor support plate is >> >> evidenced >> >> by the clearly heard thunk when you tip the camera from side to side >> >> (when >> >> the camera is off) >> > >> > Scaling and measuring images of the SR mechanism I estimate the >> > clearance stop to stop in any direction is very close to 6mm so the >> > system could probably accommodate +/- 2.5mm of correction. >> > >> >> >> >> -- >> Using Opera's revolutionary e-mail client: http://www.opera.com/m2/ >> >> >> -- >> PDML Pentax-Discuss Mail List >> PDML@pdml.net >> http://pdml.net/mailman/listinfo/pdml_pdml.net > -- Using Opera's revolutionary e-mail client: http://www.opera.com/m2/ -- PDML Pentax-Discuss Mail List PDML@pdml.net http://pdml.net/mailman/listinfo/pdml_pdml.net
