There's special debug modes for dl, ds, ds2, k100d Pentax DSLR for instance to shift AF point. Can anyone comment this?
STEP 1. Power OFF While pressing [AE-L]+[INFO], turn the camera on. Firmware is desplayed on LCD. Press [MENU]->[MENU]->[INFO] within 5 seconds. You can see DEBUG mode screen. By pressing [Right key],Make [DEBUG MODE DIS] to [DEBUG MODE EN]. Then, Press [OK]. 2. Press [MENU], you can see setup menu. By pressing [Up key], select AF TEST. By pressing [Right key], go into AF TEST menu. By pressing [Down key], select FOCUS CORR. now you can adjust shift amount by pressing [right key] or [left key]. (*Don't touch AF Area Test.) after changing the value, Press [OK] to save. 3. Test your camera that Focus is corrected. (repeat step 2. till you satisfy the result.) 4. Power OFF While pressing [AE-L]+[INFO], turn the camera on. Firmware is desplayed on LCD. Press [MENU]->[MENU]->[INFO] within 5 seconds. You can see DEBUG mode screen. By pressing [Right key],Make [DEBUG MODE EN] to [DEBUG MODE DIS]. Then, Press [OK]. 5. Go out and enjoy!! Again, You YOURSELF is responsible for doing this process. Capture debug simply brings capture details normally not presented to photographer, but I'd love to hear some things about AF shift. What does it shift, it can't be focus points themselves, but rather a focus distance which is dangrouns thing to adjust as I see. -- new photos ever so often... <http://roman.blakout.net/> -- PDML Pentax-Discuss Mail List [email protected] http://pdml.net/mailman/listinfo/pdml_pdml.net
