I see only Ver: 1.10 on the LCD, but I see no loading/completed info on the display. How do you "look in the bin"?
Jack --- Markus Maurer <[EMAIL PROTECTED]> wrote: > My K10D shows Firmware 1.10 after the update, while a look inside the > bin > clearly shows 1.11 > Maybe the translation to the german menus has errors? > Can anybody confirm that his K10D shows 1.11? > > > greetings > Markus > > Copy FWD162B to the freshly formatted SD card, then proceed as > stated: > > > I've then installed a fully charged battery, turned off the camera, > > transferred the SD card to the camera and turned it on while > holding > > in the menu button. > > It should say "loading" on the screen IIRC, takes a couple of minutes > to > complete. If you then turn the camera on holding in the menu button > as > before > is should show the later 1.11 firmware revision, remember to remove > the SD > card containing the update first. > > Hope this helps, > > John > > > > -- > PDML Pentax-Discuss Mail List > [email protected] > http://pdml.net/mailman/listinfo/pdml_pdml.net > ____________________________________________________________________________________ TV dinner still cooling? Check out "Tonight's Picks" on Yahoo! TV. http://tv.yahoo.com/ -- PDML Pentax-Discuss Mail List [email protected] http://pdml.net/mailman/listinfo/pdml_pdml.net
