Hi Markus, For what its worth.. My K10 shows v1.11 when pressing the menu button on startup. Also the exif data that is embedded in images report fw ver 1.11
Regards Patrick On 3/9/07, Markus Maurer <[EMAIL PROTECTED]> wrote: > My K10D shows Firmware 1.10 after the update, while a look inside the bin > clearly shows 1.11 > Maybe the translation to the german menus has errors? > Can anybody confirm that his K10D shows 1.11? > > > greetings > Markus > > Copy FWD162B to the freshly formatted SD card, then proceed as stated: > > > I've then installed a fully charged battery, turned off the camera, > > transferred the SD card to the camera and turned it on while holding > > in the menu button. > > It should say "loading" on the screen IIRC, takes a couple of minutes to > complete. If you then turn the camera on holding in the menu button as > before > is should show the later 1.11 firmware revision, remember to remove the SD > card containing the update first. > > Hope this helps, > > John > > > > -- > PDML Pentax-Discuss Mail List > [email protected] > http://pdml.net/mailman/listinfo/pdml_pdml.net > -- Regards Patrick Genovese -- PDML Pentax-Discuss Mail List [email protected] http://pdml.net/mailman/listinfo/pdml_pdml.net
