At last someone to give Cotty a run for his money... Leon Altoff wrote: > Mike, > > The unit looks a bit cobbled together, but it works fine and the AF360 > is completely usable as a standard flash. Here are some of the salient > points from when I made it. I'm not going to take it apart to take > internal photos. Like all modern electronics it's very tight and > delicate inside and should be played with as little as possible. > > Here are some quick and dirty pictures of what it looks like. > > From above > http://www.bluering.org.au/leon/flash/FrankenFlash4259.jpg > > From the front > http://www.bluering.org.au/leon/flash/FrankenFlash4260.jpg > > The socket on the flash > http://www.bluering.org.au/leon/flash/FrankenFlash4263.jpg > > Folded up > http://www.bluering.org.au/leon/flash/FrankenFlash4264.jpg > > Electronically it's easy - 3 wires and a plug and socket. Mechanically > it's tight and fiddly. > > The second flash tube is housed in the swivel head of a very old Metz > flash. I initially used the tube out of the Metz as well, but it > eventually killed the main flash transistor. I now use a replacement > AF360 tube in the Metz housing and it's been working for about 3 years > with no problem. > > The second tube is simply wired in parallel to the first via a mini DIN > socket on the flash. Do not use a headphone type socket as this shorts > out when being unplugged and you get a lot of sparks and mess. The > wiring goes from the tube through the wiring on the opposite side to the > tilt locking button and to the mini DIN. The socket is located in the > only place where there is any room inside the flash. Be very careful > how you run the wires particularly in the head of the flash. It needs > to be out of the way of the mechanism that drives the zoom. > > The brackets are simply whatever I could find that put things in the > right place. I'll rebuild the bracket with something that looks better > when it breaks. > > The first prototype was made about 6 or 7 years ago using an AF240F > flash with a broken hotshoe. It had no socket for unplugging the second > head and had an old hotshoe from another glued on it's side to mount > onto the bracket (yes the same bracket I'm still using). I used it with > a Z1p and then the MZ-S before I retired it and upgraded to the AF360 to > use the PTTL. This one is the second. > > Hope this gives you an idea, but don't blame me if anything you do kills > the flash. > >
-- Entropy Seminar: The results of a five yeer studee ntu the sekend lw uf thurmodynamiks aand itz inevibl fxt hon shewb rt nslpn raq liot. -- PDML Pentax-Discuss Mail List [email protected] http://pdml.net/mailman/listinfo/pdml_pdml.net
