You get a kick-back from the "Shack"? That trick might have worked on
an Idahoan, but not an old sophisticated Californian. NEAH!

Jack
--- Tom C <[EMAIL PROTECTED]> wrote:

> Yours is the 220V model Jack. You were probably send the wrong
> adapter. Not 
> to worry.  Go to your nearest Radio Shack and get a converter. Plug
> into 
> 220.  I heard that the 220V models performance is "dazzling".  :-)))
> 
> Tom C.
> 
> 
> >From: Jack Davis <[EMAIL PROTECTED]>
> >Reply-To: Pentax-Discuss Mail List <[email protected]>
> >To: Pentax-Discuss Mail List <[email protected]>
> >Subject: Re: Simply Shocking
> >Date: Tue, 23 Oct 2007 06:22:47 -0700 (PDT)
> >
> >I saw this recall notice a couple days ago, but didn't check my
> "three
> >pin plug cord" 'til this AM.
> >I find a two pin for the battery charger, but no three pin. Owner's
> >manual doesn't show such.(?)
> >Did I get shorted..again? ;-))
> >
> >Jack
> >
> >--- Tom C <[EMAIL PROTECTED]> wrote:
> >
> > > Off another Pentax list...
> > >
> > >
>
>http://www.pocket-lint.co.uk/news/news.phtml/10861/11885/Pentax-issues-product-recall-statement.phtml
> > >
> > > 22 October 2007 16:18 GMT - Pentax has issued a product recall
> > > statement, saying that they have been made aware that a small
> > > percentage of the three-pin plug cords provided with some of its
> > > cameras may have a manufacturing defect, despite having been
> supplied
> > > to Pentax with full British and European safety accreditation.
> > >
> > > This recall applies to specific products sold after the 20th
> November
> > > 2006.
> > >
> > > Products potentially affected are:
> > >
> > > * Optio A20
> > > * Optio T20
> > > * Optio W20
> > > * Optio S7
> > > * Optio L20
> > > * K10D
> > >
> > > Customers are being asked to check the plug cords of cameras that
> fit
> > > these criteria.
> > >
> > > To identify a potentially faulty plug cord, customers should
> check
> > > the rear of the three-pin plug cord by holding it by the end with
> the
> > > three pins and turning the pins to face away from them.
> > >
> > > If the box containing text says "Approved BSI KM 45980" they
> should
> > > cease use and contact the Pentax helpline on 0800 2889410 for a
> > > replacement cord which will be sent immediately.
> > >
> > > The helpline will also arrange for the customer to return the
> > > recalled cord free of charge.
> > >
> > > David Moore, managing director of Pentax UK comments, "We
> apologise
> > > for inconvenience caused to our customers whilst we take this
> > > precautionary measure. Pentax takes the safety and quality of the
> > > products it sells very seriously and it spends a considerable
> amount
> > > of time and effort ensuring that the products it sells meet all
> > > relevant regulations and standards".
> > >
> > > Further information can be found at ww.pentax.co.uk/plugcord
> > >
> > >
> > >
> > > Tom C.
> > >
> > >
> > >
> > > --
> > > PDML Pentax-Discuss Mail List
> > > [email protected]
> > > http://pdml.net/mailman/listinfo/pdml_pdml.net
> > > to UNSUBSCRIBE from the PDML, please visit the link directly
> above
> > > and follow the directions.
> > >
> >
> >
> >__________________________________________________
> >Do You Yahoo!?
> >Tired of spam?  Yahoo! Mail has the best spam protection around
> >http://mail.yahoo.com
> >
> >--
> >PDML Pentax-Discuss Mail List
> >[email protected]
> >http://pdml.net/mailman/listinfo/pdml_pdml.net
> >to UNSUBSCRIBE from the PDML, please visit the link directly above
> and 
> >follow the directions.
> 
> 
> 
> -- 
> PDML Pentax-Discuss Mail List
> [email protected]
> http://pdml.net/mailman/listinfo/pdml_pdml.net
> to UNSUBSCRIBE from the PDML, please visit the link directly above
> and follow the directions.
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

-- 
PDML Pentax-Discuss Mail List
[email protected]
http://pdml.net/mailman/listinfo/pdml_pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
the directions.

Reply via email to