>> Does the K10D have the wireless flash capability ... > Yes with firmware updates and with 2 limitations:
> * You can only chose channel nr 1 Well, you *can* choose other channels on the K10D, the same way as with the *istD. Having said that, setting it is about the most convoluted and unintuitive way imaginable: The camera picks up the wireless channel of a slave set to remote when its mounted on the hot-shoe. So put the flash on the camera, set your flash to Channel X and Slave mode, then enable wireless mode on the camera. It will show Ch X (where it usually shows Ch 1), and will work just fine on that channel. You then take the slave flash off the hotshoe and put it where you actually want it... Whoever thought up this at Pentax should be shot.... (what would be wrong with just using a thumbwheel to change channel while its showing "Ch 1" after turning on wireless mode...) > * No HSS in wireless mode Indeed. Love, Light and Peace, - Peter Loveday -- PDML Pentax-Discuss Mail List [email protected] http://pdml.net/mailman/listinfo/pdml_pdml.net to UNSUBSCRIBE from the PDML, please visit the link directly above and follow the directions.
