Jerome:  This happened to me on a different tripod & I had to take it to the 
camera shop to have someone tighten the lever screws.  Also, I don't know 
about your tripod, but it turned out I had a little plastic screw driver 
gizmo that was attached to my tripod leg, which I can now use (now that I'm 
aware that it's there) to tighten lever screws.  I have one of those tripods 
from Calumet Photo, not a fancy name brand, but maybe since you have levers, 
this might fix your problem.  My problem is now fixed.  Haven't had any 
problems.  HTH.
Cheers, Christine


----- Original Message ----- 
From: "Jerome" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Saturday, March 29, 2008 6:36 PM
Subject: Help Needed: Sliding Bogen tripod legs


> Set up in question: Bogen 3036 tripod with the 400mm f2.8 lens.
>
> Problem: I'll set it up, lock all the levers, and 4 seconds later the
> tripod starts to sink to one side. Whats happening is that the leg
> sections are starting to slide and collapse into each other despite all of
> the locks being tightly secured. On the lighter tripod I use for hiking
> (3221) I can tighten things up with the hexagon shaped thingamajig and I'm
> back in business, but that doesn't seem to work for the 3036. The latter
> tripod seems to use more of a hydraulic system for controlling the legs
> rather than just the screw-and-hold system of the former. So does this
> mean that the hydraulics are just shot and I'm outta luck?
>
> I tried a Google search but maybe I'm not using the right terms. I've also
> sent an email to Manfrotto, but I thought I'd ask here while I wait for a
> response. Any help would be appreciated. Thanks.
>
>
>
>
> -- 
> PDML Pentax-Discuss Mail List
> [email protected]
> http://pdml.net/mailman/listinfo/pdml_pdml.net
> to UNSUBSCRIBE from the PDML, please visit the link directly above and 
> follow the directions.
> 



-- 
PDML Pentax-Discuss Mail List
[email protected]
http://pdml.net/mailman/listinfo/pdml_pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
the directions.

Reply via email to