Hi Mark. Yes, i'm shooting at fine mode which gives me 2000x1320 pixels.When i open up an image in PS it is 18x27,res of 72.When i scale down to do the 8x10 or 5x7's the res will go to 164 and 268(i think). I was just wondering were i might have to go to print something of that size,just to see what it looks like, in the GTA (Greater Toronto Area)
Dave ---- Begin Original Message ---- From: Mark Roberts <[EMAIL PROTECTED]> Sent: Thu, 29 Nov 2001 14:27:39 -0500 To: [EMAIL PROTECTED] Subject: RE: OT:Full size PS prints David Brooks wrote: >When i open a .Jpg taken from the dreaded >D1, the app. size is 18 x 27 inches on the image >screen at a res. of 72. >If one wanted to print that size off,were might one >go?? >Tom's comments about my S800 have got me intereted. You want a *minimum* resolution of 250 pixels per inch for printing. 300 is better. 350-360 is best. Going over 360 doesn't buy you anything. If 72 is giving you 18 x 27 inches then 250 ppi will give you about 5 x 7. Seems a bit small to me. Are you shooting at maximum resolution? -- Mark Roberts www.robertstech.com - This message is from the Pentax-Discuss Mail List. �To unsubscribe, go to http://www.pdml.net and follow the directions. Don't forget to visit the Pentax Users' Gallery at http://pug.komkon.org . ---- End Original Message ---- Pentax User Stouffville Ontario Canada Sign up today for your Free E-mail at: http://www.canoe.ca/CanoeMail - This message is from the Pentax-Discuss Mail List. To unsubscribe, go to http://www.pdml.net and follow the directions. Don't forget to visit the Pentax Users' Gallery at http://pug.komkon.org .
