From: Bob Sullivan
Did you change the dime sized battery in the back itself??? Bob S.
No, I hadn't seen mention that there is a battery in the back before I
posted. After seeing that, I looked and found the little screw next to
the word "battery". I know where it is now.
At this point, I don't know if I'll bother, since someone also wrote
that the PZ-1p is NOT the model that puts the date in between the
frames, that it puts the date in the image.
But I do appreciate all the help.
I wonder why Pentax didn't include information about it in the manual?
On Sun, Nov 22, 2009 at 10:32 PM, John Sessoms <[email protected]> wrote:
> From: gldnbearz
>>
>> Looking at the back of my Zx-5n, the LCD buttons read Date, select, &
>> adjust. ?Sets the date if you wanted to imprint the film. ?I tried it
>> once and turned it off. ?I just pressed the Date button and it
>> actually showed the correct date! ?Time was off by about 15 mins, but
>> the camera itself isn't loaded with batteries. ?I suspect if you press
>> your Mode button, something might happen.
>>
>> - Pat
>
> I've tried it with the camera switched to Off, User, & On. Nothing happens.
>
> I replaced the battery and tried it again, still nothing happens.
>
> The three buttons on the back of the PZ-1p are marked Mode, Select & Adjust.
>
--
PDML Pentax-Discuss Mail List
[email protected]
http://pdml.net/mailman/listinfo/pdml_pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow
the directions.
