The short answer is yes.
At 11:34 PM 1/17/2002 +0100, Maciej wrote:
>----- Original Message -----
>From: Tim Engel
>
> > 16 Jan 02, Peter Alling <[EMAIL PROTECTED]> wrote:
> > >
> > > When you want to take a double exposure press the film
> > > rewind button, while holding the button advance the film
> > > lever. This will cock the shutter without advancing the film.
> >
> >
> > Just one small addition:
> >
> > First crank the film rewind knob until you feel light tension on the film
> > (take up the slack in the film can). Then depress the release button and
> > advance the film... like Peter said.
>
>Thanks for the info. I've just tested it with some old film and it seems
>that I got everything right.
>Just from the curiosity - when there is no film loaded, with a rewind button
>depressed, mowing the advance lever causes the take-up spool to rotate
>although two weels to the left are not moving. When I loaded the film it
>didn't move. So, the question is - is the advance lever's movement lost on
>some type of clutch so the film isn't winded which would cause the
>perforation to be torn?
>
>Thanks
>
>Maciej Marchlewski
>-
>This message is from the Pentax-Discuss Mail List. To unsubscribe,
>go to http://www.pdml.net and follow the directions. Don't forget to
>visit the Pentax Users' Gallery at http://pug.komkon.org .
-
This message is from the Pentax-Discuss Mail List. To unsubscribe,
go to http://www.pdml.net and follow the directions. Don't forget to
visit the Pentax Users' Gallery at http://pug.komkon.org .
