thanks for your reply, I was kinda hoping I wouldnt have to "turn on" the SR before snapping an image but it looks like you have to wait for it to do its stuff (like af) before the camera is ready to shoot.
----------------- J.C.O'Connell [email protected] ----------------- -----Original Message----- From: PDML [mailto:[email protected]] On Behalf Of John Sessoms Sent: Saturday, October 13, 2012 7:32 PM To: [email protected] Subject: RE: Question about SR I could be wrong, but I think the motion detectors are always active when the switch is "ON", but the actuators that move the sensor only do their thing while the shutter is open. Or it might be the motion detectors are activated by half press & actuators are activated by full press. From: "J.C. O'Connell" > If you leave it "on" is SR on all the time or only when you > half press shutter button? > > ----------------- > J.C.O'Connell > [email protected] > ----------------- > > -----Original Message----- > From: PDML [mailto:[email protected]] On Behalf Of [email protected] > Sent: Saturday, October 13, 2012 2:50 PM > To: Pentax-Discuss Mail List > Subject: Re: Question about SR > > My K20D has a rotating 2 position switch on the back, that turns the feature > > on or off. > > Kenneth Waller > http://www.pentaxphotogallery.com/kennethwaller > > ----- Original Message ----- > From: "J.C. O'Connell" <[email protected]> > Subject: Question about SR > > >> On the Pentax dslr bodies that have SR, how do you turn the SR on? >> By pressing the shutter button partially? Seems like it would need to >> have some sort of auto off switch so the batteries won't drain... >> >> ----------------- >> J.C.O'Connell >> [email protected] >> ----------------- -- PDML Pentax-Discuss Mail List [email protected] http://pdml.net/mailman/listinfo/pdml_pdml.net to UNSUBSCRIBE from the PDML, please visit the link directly above and follow the directions. -- PDML Pentax-Discuss Mail List [email protected] http://pdml.net/mailman/listinfo/pdml_pdml.net to UNSUBSCRIBE from the PDML, please visit the link directly above and follow the directions.
