on 3/22/02 10:31 AM, Cotty at [EMAIL PROTECTED] wrote: > According to the specs, it needs to be: > > 3.3v unbuffered, low power 144 pin 100MHz 10 ns SO DIMM RAM. > > And I also understand that the 'lower slot' RAM, that is the underside > slot on the CPU daughter board, is the smaller 1.5" size, while the upper > slot can take the taller 2" (or bigger?) RAM cards. And the smaller, 1.5" > size cards will fit in both the lower and upper slots anyway. > > Am I right so far?
Cotty, This is directly from the Apple Memory Guide: "One RAM expansion slot can accommodate a single card of up to128 MB for a total of 192 MB. 128 MB SO-DIMM (1.5-inch wide card) required in top slot for space reasons." Based on this it seems the upper slot requires the smaller dimm. D - This message is from the Pentax-Discuss Mail List. To unsubscribe, go to http://www.pdml.net and follow the directions. Don't forget to visit the Pentax Users' Gallery at http://pug.komkon.org .