Working on that Bipin! Playing phone tag with the parts dept now. The bottom plate has the serial and model #, so I will leave it. The lcd cover is easily replaced and they sell replacements. Getting the parts will be the hard part. :/
On Mon, Apr 29, 2013 at 1:27 PM, Bipin Gupta <[email protected]> wrote: > Zos, you swapped the good ring (lens mount) from the K-7. Can you do > the same for the bottom plate? If not, order a Bottom Plate, as > changing it is very easy. Do buy a JIS (Japanese Industrial Standard) > "MOODY, made in the USA, Screwdriver Set for $ 16 from Amazon com. The > cheap Philips Cross Point is not the right screwdriver. > As for the scratched LCD Screen, it can be polished using Fine Grit > Turtle Shell Car Polishing Compound. This is labor intensive work as > it has to be done gently. Use masking tape to cover the area around > the LCD Screen. > Since the camera (& the sensor) worked fine after the fall, it will be > safer & smarter to send in a "good" looking gear, so that CRIS will > have little or no excuse for refusing warranty repair. > Better to play it safe. Good Luck. > Regards. > Bipin - from that far away enchanting land > > -- > PDML Pentax-Discuss Mail List > [email protected] > http://pdml.net/mailman/listinfo/pdml_pdml.net > to UNSUBSCRIBE from the PDML, please visit the link directly above and follow > the directions. -- PDML Pentax-Discuss Mail List [email protected] http://pdml.net/mailman/listinfo/pdml_pdml.net to UNSUBSCRIBE from the PDML, please visit the link directly above and follow the directions.
