SR is on whether you turn it off or not. With it off it just locks
into place. I've used it on tripods and it doesn't seem to make much
difference with it on so I never turn it off. I usually use a 2s timer
90% of the time anyways.

On Thu, Dec 19, 2013 at 1:14 PM, Paul Stenquist <[email protected]> wrote:
> Nice pic. When I do all-day multi vehicle car shoots for pubs I do both 
> handheld and tripod with the 60-250. I never turn off shake reduction and 
> generally don't use the remote or mirror up. Haven't seen a problem, but I 
> think I'll use the remote next time. That shouldn't slow me down much.
>
> Paul via phone
>
>> On Dec 19, 2013, at 1:02 PM, Christine Aguila <[email protected]> wrote:
>>
>> Good reminder, Godfrey!  Love the photo, and Season’t Greetings to you as 
>> well!  Cheers, Christine
>>
>>
>>> On Dec 19, 2013, at 1:34 AM, Godfrey DiGiorgi <[email protected]> 
>>> wrote:
>>>
>>> This is just as cautionary for Pentax cameras with IBIS as it is with 
>>> Olympus IBIS …
>>>
>>> I had the E-M1 on a tripod this evening to do our annual holiday 
>>> self-portrait. This is always a tricky thing as the lights tend to 
>>> saturate, so I run -EV compensation and soft ambient lighting to bring it 
>>> up. Exposures with the ZD 11-22 @ 11mm were in the ISO 400 @ f/8 @ 4-5 
>>> seconds range.
>>>
>>> After four blurry shots, using both SAF and MF focusing, I was beginning to 
>>> wonder what had gone wrong with the camera.
>>> Then it dawned on me ... I turned off IS. The next two captures were razor 
>>> sharp.
>>>
>>> So ... they mean it when they recommend turning off IS for tripod use. It 
>>> might not affect you in some other lens/exposure time range as much, but it 
>>> was clearly the problem here.
>>>
>>> Godfrey
>>>
>>> Season's Greetings to all: 
>>> http://farm4.staticflickr.com/3769/11446664346_4d89b856ee_o.jpg
>>> --
>>> PDML Pentax-Discuss Mail List
>>> [email protected]
>>> http://pdml.net/mailman/listinfo/pdml_pdml.net
>>> to UNSUBSCRIBE from the PDML, please visit the link directly above and 
>>> follow the directions.
>>
>>
>> --
>> PDML Pentax-Discuss Mail List
>> [email protected]
>> http://pdml.net/mailman/listinfo/pdml_pdml.net
>> to UNSUBSCRIBE from the PDML, please visit the link directly above and 
>> follow the directions.
>
> --
> PDML Pentax-Discuss Mail List
> [email protected]
> http://pdml.net/mailman/listinfo/pdml_pdml.net
> to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
> the directions.

-- 
PDML Pentax-Discuss Mail List
[email protected]
http://pdml.net/mailman/listinfo/pdml_pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
the directions.

Reply via email to